Thumbnail - Octoprint, Mainsail

Please post your suggestions for software changes here
Sunshine
Posts: 65
Joined: Mon Nov 26, 2018 12:53 pm

Thumbnail - Octoprint, Mainsail

Postby Sunshine » Tue Apr 13, 2021 7:44 pm

I have been using ideamaker for a long while and recently upgraded my Ender 3 V2 to Klipper with Mainsail as the web interface to it. I would like to send a thumbnail to that interface and have it look like the same as in RaiseCloud. It works when I use PrusaSlicer but I would like to use Ideamaker instead for most of my prints.

User avatar
Vicky@Raise3D
Posts: 8242
Joined: Fri Mar 25, 2016 3:54 am

Re: Thumbnail - Octoprint, Mainsail

Postby Vicky@Raise3D » Wed Apr 14, 2021 12:39 am

Are you looking for having gcode file to be formated to any specific way?

Sunshine
Posts: 65
Joined: Mon Nov 26, 2018 12:53 pm

Re: Thumbnail - Octoprint, Mainsail

Postby Sunshine » Wed Apr 14, 2021 12:37 pm

Vicky@Raise3D wrote:Are you looking for having gcode file to be formated to any specific way?


I do not think so, does this link help? https://docs.mainsail.xyz/quicktips/thumbnails

User avatar
Vicky@Raise3D
Posts: 8242
Joined: Fri Mar 25, 2016 3:54 am

Re: Thumbnail - Octoprint, Mainsail

Postby Vicky@Raise3D » Thu Apr 15, 2021 12:46 am

I will forward over to developing team to see whether we can achieve it in future versions.

schuema
Posts: 22
Joined: Tue Feb 05, 2019 4:14 pm

Re: Thumbnail - Octoprint, Mainsail

Postby schuema » Wed Sep 01, 2021 5:15 am

@Vicky@raise3d: Are there some news about the thumbnail for mailsail?

User avatar
Vicky@Raise3D
Posts: 8242
Joined: Fri Mar 25, 2016 3:54 am

Re: Thumbnail - Octoprint, Mainsail

Postby Vicky@Raise3D » Tue Sep 07, 2021 8:30 pm

The feature is still under developing. Haven't heard any update from the developing team yet.

User avatar
Vicky@Raise3D
Posts: 8242
Joined: Fri Mar 25, 2016 3:54 am

Re: Thumbnail - Octoprint, Mainsail

Postby Vicky@Raise3D » Mon Oct 04, 2021 6:05 pm

From version 4.2.1, ideaMaker starts supporting octoprint and thumbnail for mainsail.
https://www.ideamaker.io/blogDetail.html?id=69
You can enable GCode Thumbnails option under Print Settings.
Image_20211004110505.jpg

schuema
Posts: 22
Joined: Tue Feb 05, 2019 4:14 pm

Re: Thumbnail - Octoprint, Mainsail

Postby schuema » Tue Oct 05, 2021 12:43 pm

[quote="Vicky@Raise3D"]From version 4.2.1, ideaMaker starts supporting octoprint and thumbnail for mainsail.
https://www.ideamaker.io/blogDetail.html?id=69
You can enable GCode Thumbnails option under Print Settings.
....
@Vicky@Raise3D: I was happy about it, but in my case it doesn't work with mainsail. I tried a lot of resolutions (48x48, 30x30, 400x300) everything what was descripted in mainsail help, but I didn't get any Thumbnail. I use alwys the newest version of Klipper mainsail...

Bildschirmfoto_2021-10-05_14-41-24.png
Settings ideaMaker

Bildschirmfoto_2021-10-05_14-40-19.png
Version of my System
Bildschirmfoto_2021-10-05_14-40-19.png (15.64 KiB) Viewed 979 times


Best regards
Martin

jahirpc
Posts: 1
Joined: Tue Oct 12, 2021 12:02 pm

Re: Thumbnail - Octoprint, Mainsail

Postby jahirpc » Tue Oct 12, 2021 12:12 pm

Hello, in advance I apologize for my terrible English. :x This feature has not been implemented in MoonRaker, that is why you cannot see the thumbnails in mainsail. Make a few changes and so far it's working fine.
If you are interested, I will gladly send the file with the changes made. The downside of this approach is that when it is updated again, the change must be made again. It is not a problem for me because the change really takes a maximum of 2 minutes.
[img]
vista%20previa.JPG
[/img]
Attachments
vista previa.JPG

User avatar
Vicky@Raise3D
Posts: 8242
Joined: Fri Mar 25, 2016 3:54 am

Re: Thumbnail - Octoprint, Mainsail

Postby Vicky@Raise3D » Wed Oct 13, 2021 3:51 pm

Is there any limitation being added in Mainsail?
The same file can be printed out with no issue on Octoprint with Thumbnails.

th33xitus
Posts: 6
Joined: Thu Oct 14, 2021 11:16 am

Re: Thumbnail - Octoprint, Mainsail

Postby th33xitus » Thu Oct 14, 2021 11:23 am

Vicky@Raise3D wrote:Is there any limitation being added in Mainsail?
The same file can be printed out with no issue on Octoprint with Thumbnails.


Hi!

No there is no limitation in Mainsail.
The currently limiting factor is Moonraker, which is the API Mainsail is using to communicate with the Klipper firmware.
Moonraker parses the thumbnails from the uploaded g-code files. Those parsing option has to be added to Moonraker yet which will hopefully happen soon. :)

Thank you for adding support for it though!

- th33xitus
#team-mainsail

User avatar
Vicky@Raise3D
Posts: 8242
Joined: Fri Mar 25, 2016 3:54 am

Re: Thumbnail - Octoprint, Mainsail

Postby Vicky@Raise3D » Fri Oct 15, 2021 5:05 pm

jahirpc wrote:Hello, in advance I apologize for my terrible English. :x This feature has not been implemented in MoonRaker, that is why you cannot see the thumbnails in mainsail. Make a few changes and so far it's working fine.
If you are interested, I will gladly send the file with the changes made. The downside of this approach is that when it is updated again, the change must be made again. It is not a problem for me because the change really takes a maximum of 2 minutes.
[img]
vista%20previa.JPG
[/img]


Would you mind share more information about the changes you mentioned? Is it something inside Gcode file or somewhere eles?

th33xitus
Posts: 6
Joined: Thu Oct 14, 2021 11:16 am

Re: Thumbnail - Octoprint, Mainsail

Postby th33xitus » Tue Oct 19, 2021 5:59 pm

Vicky@Raise3D wrote:Would you mind share more information about the changes you mentioned? Is it something inside Gcode file or somewhere eles?

He means, that he modified the Moonraker Code to be able to parse the thumbnails from the g-code.
At this point in time, Moonraker now officially supports parsing thumbnails from g-code generated by IdeaMaker.
So all issues should be resolved by now. :)

Although i must say, the viewing angle of the thumbnail is somehwhat...special?
Why did you not went with a simple isometric view?

User avatar
Vicky@Raise3D
Posts: 8242
Joined: Fri Mar 25, 2016 3:54 am

Re: Thumbnail - Octoprint, Mainsail

Postby Vicky@Raise3D » Wed Oct 20, 2021 6:48 pm

It is currently using the same Front View as RaiseTouch instead of end view.

svandru
Posts: 62
Joined: Tue Dec 31, 2019 5:48 pm

Re: Thumbnail - Octoprint, Mainsail

Postby svandru » Sun Oct 31, 2021 8:01 pm

Vicky,
How does one see the thumbnails in OctoPrint? I found the iDeaMaker print setting and turned it on, but I don't see any thumbnails in OctoPrint. I use the PrintJobHistory Plugin which adds Cura or PrusaSlicer thumbnails in a database of print jobs, but it does not see iDeaMaker thumbnails. Where else in OctoPrint would one see thumbnails?

svandru
Posts: 62
Joined: Tue Dec 31, 2019 5:48 pm

Re: Thumbnail - Octoprint, Mainsail

Postby svandru » Mon Nov 01, 2021 12:04 am

How does one see the thumbnails in OctoPrint?

I see now, it is another plugin that needs to be installed. I see the thumbnails now.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 1 guest