Support generation issue - Ragged lines

Discussions about ideaMaker and other printing software.
Help3D
Posts: 8
Joined: Thu Mar 25, 2021 2:41 pm

Support generation issue - Ragged lines

Postby Help3D » Tue Apr 06, 2021 2:15 pm

Why this big difference between S3D and IDM in support generation ?

Here the Gcode: https://we.tl/t-pvY2Q1JWuE
Attachments
S3D support.PNG
Support IDM.PNG

User avatar
Vicky@Raise3D
Posts: 7915
Joined: Fri Mar 25, 2016 3:54 am

Re: Support generation issue - Ragged lines

Postby Vicky@Raise3D » Wed Apr 07, 2021 4:23 am

You can try support with larger pillar size.

Help3D
Posts: 8
Joined: Thu Mar 25, 2021 2:41 pm

Re: Support generation issue - Ragged lines

Postby Help3D » Wed Apr 07, 2021 8:24 am

it is working only if selecting "pillar mode" and not "normal", why ?

User avatar
Vicky@Raise3D
Posts: 7915
Joined: Fri Mar 25, 2016 3:54 am

Re: Support generation issue - Ragged lines

Postby Vicky@Raise3D » Thu Apr 08, 2021 2:40 am

With normal type support, ideaMaker will use smaller sampling size to take sample to generate support.
There will be no defined sampling size to generate pillar type support. The size of each pillar is the size of sampling.


Return to “Software”

Who is online

Users browsing this forum: alfrank and 2 guests