Get proper harden/steel nozzle for the E2

FOGD.NO
Posts: 156
Joined: Wed Mar 25, 2020 7:42 am

Get proper harden/steel nozzle for the E2

Postby FOGD.NO » Thu Jul 30, 2020 6:58 pm

I am very disapointed with the harden (coated) nozzles that is the only offer from Raise3d to print special filament that need steel nozzle.

I have printed 1/3 of FormFutura CF Petg and I now got a 1mm nozzle instead of 0.4.

Do anyone make nozzles for these machines? I think it is terrible that I bought an "industrial" 3dprinter at high cost and then not able to print something like carbonfibre petg.

The print at the left is the first print I made, and the right is the last.

HardenRaise3dE2Nozzle.jpg
HardenRaise3dE2Nozzle.jpg
Attachments
CarbonFibrePetg.jpg

Blue21
Posts: 66
Joined: Sat Jun 06, 2020 8:04 am
Location: Switzerland

Re: Get proper harden/steel nozzle for the E2

Postby Blue21 » Thu Jul 30, 2020 7:08 pm

You can use also nozzles made for the PRO2.
E2 + Prusa Mini (soon) <- UM 2+ <- Replicator2

FOGD.NO
Posts: 156
Joined: Wed Mar 25, 2020 7:42 am

Re: Get proper harden/steel nozzle for the E2

Postby FOGD.NO » Thu Jul 30, 2020 7:12 pm

Blue21 wrote:You can use also nozzles made for the PRO2.



It is the same type.. V3H. Just coated with something and inside it is brass. But does it excist steel nozzles for Pro2?

Blue21
Posts: 66
Joined: Sat Jun 06, 2020 8:04 am
Location: Switzerland

Re: Get proper harden/steel nozzle for the E2

Postby Blue21 » Thu Jul 30, 2020 7:33 pm

I didn't found such by my usual supplier, only the Ruby one, very expensive.
E2 + Prusa Mini (soon) <- UM 2+ <- Replicator2

Blue21
Posts: 66
Joined: Sat Jun 06, 2020 8:04 am
Location: Switzerland

Re: Get proper harden/steel nozzle for the E2

Postby Blue21 » Thu Jul 30, 2020 7:37 pm

I see:
https://www.matterhackers.com/store/l/r ... k/M3U7YTT6
https://filament2print.com/gb/nozzles/1 ... less_steel

But if you really only print CF loaded filament, Ruby nozzle will probably be more cost effective on the long term if you print a lot.
E2 + Prusa Mini (soon) <- UM 2+ <- Replicator2

FOGD.NO
Posts: 156
Joined: Wed Mar 25, 2020 7:42 am

Re: Get proper harden/steel nozzle for the E2

Postby FOGD.NO » Thu Jul 30, 2020 8:19 pm

Me and another one found out that MK8 nozzle probably is the same as Raise3d.

I tried a V6 nozzle now and it also fit just with longer thread while total length is same.
So printing with harden V6 nozzle now.

Blue21
Posts: 66
Joined: Sat Jun 06, 2020 8:04 am
Location: Switzerland

Re: Get proper harden/steel nozzle for the E2

Postby Blue21 » Thu Jul 30, 2020 8:25 pm

Thanks for the info and hope to hear it worked nicely.
E2 + Prusa Mini (soon) <- UM 2+ <- Replicator2

FOGD.NO
Posts: 156
Joined: Wed Mar 25, 2020 7:42 am

Re: Get proper harden/steel nozzle for the E2

Postby FOGD.NO » Fri Jul 31, 2020 9:39 pm

Blue21 wrote:Thanks for the info and hope to hear it worked nicely.


Update. The V6 does work, but not ideal since the top part is flat while the heat break of Raise3d is chamfer at the end. So ideal the heatbreak also need chamfer to match.
The MK8 nozzle is a tiny bit shorter and also flat on top.

Blue21
Posts: 66
Joined: Sat Jun 06, 2020 8:04 am
Location: Switzerland

Re: Get proper harden/steel nozzle for the E2

Postby Blue21 » Sat Aug 01, 2020 7:42 am

FOGD.NO wrote:Update. The V6 does work, but not ideal since the top part is flat while the heat break of Raise3d is chamfer at the end. So ideal the heatbreak also need chamfer to match.
The MK8 nozzle is a tiny bit shorter and also flat on top.


Thanks for the update.
E2 + Prusa Mini (soon) <- UM 2+ <- Replicator2

mechovation
Posts: 5
Joined: Tue Jul 21, 2020 5:43 pm

Re: Get proper harden/steel nozzle for the E2

Postby mechovation » Sun Aug 02, 2020 7:19 pm

Would an official representative of Raise3D care to comment on the nature of the V3H nozzles?

They are listed on the website as Hardened, not Wear Resistant . . . so which is it?

Will most likely need a refund on my uninstalled V3H's

Online
User avatar
Vicky@Raise3D
Posts: 6973
Joined: Fri Mar 25, 2016 3:54 am

Re: Get proper harden/steel nozzle for the E2

Postby Vicky@Raise3D » Tue Aug 04, 2020 11:49 pm

The V3 hardened nozzles are plated brass. According to our experience, they should be more resistant to abrasive filaments. But they will eventually start to wear over time when using abrasive filaments.

FOGD.NO
Posts: 156
Joined: Wed Mar 25, 2020 7:42 am

Re: Get proper harden/steel nozzle for the E2

Postby FOGD.NO » Wed Aug 05, 2020 4:54 am

Vicky@Raise3D wrote:The V3 hardened nozzles are plated brass. According to our experience, they should be more resistant to abrasive filaments. But they will eventually start to wear over time when using abrasive filaments.


So why not make optional steel nozzle like others?

Online
User avatar
Vicky@Raise3D
Posts: 6973
Joined: Fri Mar 25, 2016 3:54 am

Re: Get proper harden/steel nozzle for the E2

Postby Vicky@Raise3D » Thu Aug 06, 2020 1:09 am

We don't have one at this time. Will forward your needs to developing team to see how we can improve in future.

Allram
Posts: 12
Joined: Sat May 02, 2020 1:18 pm

Re: Get proper harden/steel nozzle for the E2

Postby Allram » Thu Aug 06, 2020 3:38 pm

Vicky@Raise3D wrote:We don't have one at this time. Will forward your needs to developing team to see how we can improve in future.


Or you can reach out to Slice Engineering and ask if they can make a Vanadium nozzle to the E2 :)

Online
User avatar
Vicky@Raise3D
Posts: 6973
Joined: Fri Mar 25, 2016 3:54 am

Re: Get proper harden/steel nozzle for the E2

Postby Vicky@Raise3D » Thu Aug 06, 2020 8:39 pm

Thanks for your recommendations. Will forward the resources to developing team.


Return to “E2”

Who is online

Users browsing this forum: Vicky@Raise3D and 1 guest