Fixed Start Position With Groups Bug

Discussions about ideaMaker and other printing software.
Y0ss-Please
Posts: 1
Joined: Tue Feb 25, 2020 5:48 pm

Fixed Start Position With Groups Bug

Postby Y0ss-Please » Tue Feb 25, 2020 6:23 pm

I think I've found a bug with the fixed start position option.

When printing multiple models in separated groups changing the Fixed Layer Start Point from the Per-Group Settings does not work. The model will use whatever value is set as the Fixed Layer Start Point in the current template, even if the template is set to random and the start point options are greyed out.

I'm trying to make sure the layer seam stays on the inside of the print where it is not visible. I'm using a larger nozzle and it leaves behind an ugly seam. This is easy to do when printing one at a time, however printing multiple at once is causing some challenges. Does anybody have advice on what to try next?

Thanks.

fixedstart-issue.jpg

Return to “Software”

Who is online

Users browsing this forum: No registered users and 0 guests