Help with Z align and vibration (?)

[wakareva]

Dear,
I have a problem with my E2 but I can't figure out what it is and how to solve it.

A. during the raft printing you see a diagonal line not expected, plus something the printing is not clear and nice

something wrong during printing the raft

B. the final result has big problem in the Z align and to print nice and clean

can you help me to understand the problem and suggest me how fix it (and how name it to search in the forum).
Thanks!

[Steven@Raise3D]

Dear,
I have a problem with my E2 but I can't figure out what it is and how to solve it.

A. during the raft printing you see a diagonal line not expected, plus something the printing is not clear and nice

2021-04-02 16.31.08.jpg

2021-04-02 16.33.12.jpg

B. the final result has big problem in the Z align and to print nice and clean

2021-04-06 09.14.17.jpg

2021-04-06 09.13.52.jpg

2021-04-06 09.14.05.jpg

can you help me to understand the problem and suggest me how fix it (and how name it to search in the forum).
Thanks!

Can you please attach the Gcode file that printed this model? Does the defect happen at the same point every time or does it move around depending on how you position the part? Also, what material was this printed out of?

[wakareva]

Hi,
I don't have that gcode, but I have another gcode of another print with a similar problem where you can see a vibration in the infill. The print also failed as you see from the picture.
No care where the model is placed on the plate.
All are printed in PLA.
(the gcode is too big, please download from here: https://www.dropbox.com/t/EMdyxMBUShZ7yMme

Now the problem became bigger: when start printing I get this error 3025

[Steven@Raise3D]

Hi,
I don't have that gcode, but I have another gcode of another print with a similar problem where you can see a vibration in the infill. The print also failed as you see from the picture.
No care where the model is placed on the plate.
All are printed in PLA.
(the gcode is too big, please download from here: https://www.dropbox.com/t/EMdyxMBUShZ7yMme

2021-04-07 09.07.51.jpg

Now the problem became bigger: when start printing I get this error 3025

2021-04-07 09.44.12.jpg

Based on the error that you are receiving it looks like there may be an issue with one of the stepper drivers on the mainboard. I would suggest creating a support ticket so that we can better diagnose and get you the replacement parts that are needed.