Ideamaker bridging issue

[the dragonlord]

Good morning, I'm Andrea from Italy. I'm starting to use Ideamaker as my preferred slicer and I really love it! The biggest issue is that regardless the STL I brint the slicer doesn't recognize at all the bridging areas...I've tried to change every single setting but nothing works...I attach some images to show what happens and the screenshots of my settings...

Could someone help me?

Thanks!
Andrea

[Vicky@Raise3D]

Would you like to share your .idea, .gcode and .data files with us?

[the dragonlord]

Here they are but it doesn't happens with a single STL, it always happens when there's a bridging over some curve

[Vicky@Raise3D]

Please try lower the Shell quantity, such like 2 shells, or at least use Per-layer Settings to modify the Shells to be 2.
The upper section of the model is a little too narrow for multiple shells to create Bridging Anchors under Solid Fill.

[the dragonlord]

Please try lower the Shell quantity, such like 2 shells, or at least use Per-layer Settings to modify the Shells to be 2.
The upper section of the model is a little too narrow for multiple shells to create Bridging Anchors under Solid Fill.

Done, nothing changes, always no bridging even with 2 shells...

[Vicky@Raise3D]

We have run a test round with your file and your settings but only modify the shells to be 2, Bridging seems show properly now.

[the dragonlord]

We have run a test round with your file and your settings but only modify the shells to be 2, Bridging seems show properly now.

Image_20201124193234.png

Image_20201124193244.png

uh, that sound strange....I've changed the shell number but it doesn't work...

[Allram]

We have run a test round with your file and your settings but only modify the shells to be 2, Bridging seems show properly now.

uh, that sound strange....I've changed the shell number but it doesn't work...

Tried with your file as well, and IdeaMaker 4.0.1, seems to bridge correctly here: