Pressure / linear advance?

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Hellraizer
Posts: 15
Joined: Thu Mar 19, 2020 7:08 am

Pressure / linear advance?

Postby Hellraizer » Mon Oct 26, 2020 10:04 am

Hi,

I'm printing some small pieces with lots of corners atm that need to fit together and I'm noticing a pronounced bulging in the corners.

On myself build printer with a duet I had combatted this issue successfully by enabling the k-factor /pressure advance.

On first search I couldn't find details about it in the documentation, can someone point me in the direction on how to set this up for raise printers?

Cheers
F.

Markus64
Posts: 335
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: Pressure / linear advance?

Postby Markus64 » Mon Oct 26, 2020 10:43 am

That would also be of great interest to me, as I am facing the same problem!

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Pressure / linear advance?

Postby Vicky@Raise3D » Tue Oct 27, 2020 1:18 am

Which printer do you have? Pro, or E? The only printer we have that pressure advance counld be tuned for should only be the E2.

Markus64
Posts: 335
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: Pressure / linear advance?

Postby Markus64 » Tue Oct 27, 2020 5:13 am

@ Vicky, that could be realized with a (long overdue) firmware update for the Pro2. Why don't you do that?

Hellraizer
Posts: 15
Joined: Thu Mar 19, 2020 7:08 am

Re: Pressure / linear advance?

Postby Hellraizer » Tue Oct 27, 2020 8:28 am

@vicky@raise

I use the pro 2. Would be great indeed to unlock this for all printers. Seems like most controllers/manufacturers have implemented some version of this.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Pressure / linear advance?

Postby Vicky@Raise3D » Wed Oct 28, 2020 1:08 am

Pro2 has custom and closed source firmware that doesn't include linear or pressure advance

Markus64
Posts: 335
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: Pressure / linear advance?

Postby Markus64 » Wed Oct 28, 2020 8:00 am

Vicky@Raise3D wrote:Pro2 has custom and closed source firmware that doesn't include linear or pressure advance


That means that we bought this expensive printer as an isolated solution and that NO firmware updates are to be expected which include new and useful functions?

Paul123
Posts: 58
Joined: Fri Sep 11, 2020 12:22 pm

Re: Pressure / linear advance?

Postby Paul123 » Thu Oct 29, 2020 1:28 am

The fact that its closed does not explain why you shouldn't try hard implementing new features.
BTW (off-topic): You company's reaction to all the hightemp longterm-print issues is soooo poor! You just ignore your design failures in a way i never saw in any other company. Vicky, i ask you: WHY?? Do you really want to watch running away customers? It is such an effort getting your printer work properly for every customer who wants more features than every 300 $ printer can do even better! And the really sad aspect on it is the fact that it wouldn't be a great effort for your company doing an firmware/hardware upgrade/redesign in order to get a really good product.
once again: not answering or pro forma answers says a lot about your strategy, and every potential customer can read about it here in future!

Vicky@Raise3D wrote:Pro2 has custom and closed source firmware that doesn't include linear or pressure advance

Hellraizer
Posts: 15
Joined: Thu Mar 19, 2020 7:08 am

Re: Pressure / linear advance?

Postby Hellraizer » Thu Oct 29, 2020 3:20 pm

Vicky@Raise3D wrote:Pro2 has custom and closed source firmware that doesn't include linear or pressure advance


Well thats to bad, but i hope that doesnt mean i wont be implemented at some point?

It should also be possible to implement this on the slicer level...

Markus64
Posts: 335
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: Pressure / linear advance?

Postby Markus64 » Thu Oct 29, 2020 3:29 pm

The firmware of the Pro2 is up to date from 2018. Marlin is now much further and many innovations are withheld from us. Except for a handful of users, nobody seems to mind what horrifies me personally!

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Pressure / linear advance?

Postby Vicky@Raise3D » Fri Oct 30, 2020 5:08 pm

We actually did try to apply it in Pro2 series a while ago.
But in the end we found that adding this feature would cause other motion control issues and haven't found another solution so far.

Markus64
Posts: 335
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: Pressure / linear advance?

Postby Markus64 » Fri Oct 30, 2020 5:24 pm

Vicky@Raise3D wrote:We actually did try to apply it in Pro2 series a while ago.
But in the end we found that adding this feature would cause other motion control issues and haven't found another solution so far.


Are there any problems implementing it on the existing hardware? As I have read, the new E2 has already included this function.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Pressure / linear advance?

Postby Vicky@Raise3D » Fri Oct 30, 2020 10:44 pm

The motion board and firwamre on E2 are totally different from Pro2 series printers.
E2 is running a version of Reprap firmware which allows you adding Pressure advance.

Markus64
Posts: 335
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: Pressure / linear advance?

Postby Markus64 » Fri Oct 30, 2020 11:33 pm

@Vicky,
the Pro2 has been produced and sold as we know it since 2018. The Pro2 costs more than the E2 and is intended to appeal to professional users, i.e. buyers. Now the motion board is out of date, the system is closed and every owner and prospective buyer wants a system that can be kept up to date. I am a technician and I am sure that a hardware upgrade would be feasible and affordable. Have you already considered this option? If customer satisfaction and loyalty are important to you, then you should think about this option very carefully. I would appreciate it because Raise should have noticed that we are actively improving the printer and its quality! It would be time to prove to us that you honor our commitment and offer a solution to keep the firmware up to date.

icy_snake
Posts: 10
Joined: Sat Dec 14, 2019 10:49 am
Location: Germany
Contact:

Re: Pressure / linear advance?

Postby icy_snake » Mon Nov 02, 2020 2:22 pm

I am 100% the same meaning as Markus64.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Pressure / linear advance?

Postby Vicky@Raise3D » Tue Nov 03, 2020 2:37 am

I will forward the requests over to developing team to review.

Ressegger
Posts: 26
Joined: Sun Nov 17, 2019 12:28 am

Re: Pressure / linear advance?

Postby Ressegger » Mon Nov 30, 2020 8:34 am

Just wanted to state that I would very much like this as well and would never consider anouther.raise product otherwise.

Yang
Posts: 4
Joined: Thu Apr 01, 2021 5:56 am

Re: Pressure / linear advance?

Postby Yang » Fri Apr 09, 2021 12:42 pm

Vicky@Raise3D wrote:I will forward the requests over to developing team to review.


Hi, would the dev team implement this feature?

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Pressure / linear advance?

Postby Vicky@Raise3D » Wed Apr 14, 2021 1:40 am

Unfortunately, with the current configuration with the firmware, adding pressure/linear advance won't be an easy process. We will see how we can make it happen in future versions.

raimondovincenti
Posts: 13
Joined: Fri Mar 05, 2021 2:22 pm

Re: Pressure / linear advance?

Postby raimondovincenti » Wed Apr 28, 2021 7:51 am

The raise3D Pro was on my wish list. But it looks like this is an old model that cannot keep up with future functionality.


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 3 guests