1. After the automatic switching of the extruder, 10mm is drawn in according to the setting. But material still runs out of about 10mm. I can not imagine that you have to pull in so much material, because this could also clog Coldend.
2. After the automatic switching of the extruder, these 10mm are missing, which were retracted in at the wipe wall or at the wipe tower, because material is missing at the beginning. You can also see in the G code file that the 10mm are not extruded back here, which was previously retracted in.
Code: Select all
G1 F3000 E-10.0000
G0 F7200 X84.850 Y191.600
G1 F3000 E0.0400
G1 F1400 X84.850 Y203.000 E0.9335
Any tips on how I can improve the two processes?
EDIT: With a Retract of -13mm on PETG it works for my first problem, but i think it's to much, because hot filament will eventually clog the hotend...
For my second problem do I have to go up with the extra restart option, for example 3 or 4mm, so that the material is available at the start for wipe wall or tower?