Double color

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Double color

Postby Michal80 » Sun May 10, 2020 5:04 pm

There was a problem printing two colors at the same time. Left exdruder and right exdruder do not overlap on the prepared model. I don't understand why this is happening. Default settings, no problem before.
Image Image Image

User avatar
Vicky@Raise3D
Posts: 7253
Joined: Fri Mar 25, 2016 3:54 am

Re: Double color

Postby Vicky@Raise3D » Mon May 11, 2020 9:56 pm

Which printer you are using? Please check whether you have set either the XY offset on touchscreen or in Printer Settings in ideaMaker.
https://support.raise3d.com/tree.html?cid=15&sid=1008

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Double color

Postby Michal80 » Tue May 12, 2020 4:25 pm

Thanks for the advice, I will calibrate the x-axis, I'll let you know how it went. I don't understand why these settings have changed, the extruder parameters on the Raise PRO 2 printer are never changed

User avatar
Vicky@Raise3D
Posts: 7253
Joined: Fri Mar 25, 2016 3:54 am

Re: Double color

Postby Vicky@Raise3D » Tue May 12, 2020 6:26 pm

Have you changed touchscreen or reset touchscreen recently?

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Double color

Postby Michal80 » Wed May 13, 2020 7:01 pm

I have restored the factory settings of the printer, is this the reason for moving the axis? Do you have any base parameter from which I can start to set the right extruder axis? The offset is +/- 30 mm. I am a beginner Raise user, so here are so many questions :)

User avatar
Vicky@Raise3D
Posts: 7253
Joined: Fri Mar 25, 2016 3:54 am

Re: Double color

Postby Vicky@Raise3D » Wed May 13, 2020 8:42 pm

You can start from 25mm in X and 0 in Y. This guide is for Pro2 series printers. The extruder offset was originally input in touchscreen. When you reset the touchscreen, the values will be changes to 0.
https://support.raise3d.com/ideaMaker/6 ... -1009.html

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Double color

Postby Michal80 » Sun May 17, 2020 7:10 pm

Thank you for your help. Full success :D Image


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests