Pro2 different Nozzle Profiles

Discussions about ideaMaker and other printing software.
a.mi-official
Posts: 3
Joined: Tue Sep 10, 2019 12:35 pm

Pro2 different Nozzle Profiles

Postby a.mi-official » Tue Sep 10, 2019 12:53 pm

Hello all,

At work we use a Raise3D PRO2. Long story short, we now have a range of nozzles from (.1, .2, .3, .4, .5, .6, .8 and 1.0 mm)

I am trying to set up profiles for all of them. Is there an easy way to copy profiles from to Pro2 profile?

WHat I have done so far is:
Set up a model, and select Slice Model.
In the Select Template window that comes up, the first option "Printer Type" I duplicated it to create another Pro 2 printer set up with .2 mm nozzles.
None of the "Main templates copied over though. how do i get them to copy?


Also does anyone have or know where i can find community made profiles for different nozzle sizes or setting that have a hybrid nozzle set up (the let and right extruder have different nozzle sizes)?

User avatar
Vicky@Raise3D
Posts: 5525
Joined: Fri Mar 25, 2016 3:54 am

Re: Pro2 different Nozzle Profiles

Postby Vicky@Raise3D » Tue Sep 10, 2019 10:03 pm

You then need to decide which printer and which filament you want to put the new profile to and select printer and filament. Once Printer and Filament selected, click Duplicate button, you will see the following image.
Screenshot_20190910144318.png
Screenshot_20190910144318.png (6.12 KiB) Viewed 74 times


Make sure the Printer, Filament and Name of the profile that you want your new profile to be duplicated are all correct. Then write a name for the new profile on top. Then it will be all settled.

a.mi-official
Posts: 3
Joined: Tue Sep 10, 2019 12:35 pm

Re: Pro2 different Nozzle Profiles

Postby a.mi-official » Mon Sep 16, 2019 6:13 pm

Vicky, thank you, I was able to do this, but i do not have any templates available unless i copy one from another printer, what settings will i need to change to account for the different size nozzle

User avatar
Vicky@Raise3D
Posts: 5525
Joined: Fri Mar 25, 2016 3:54 am

Re: Pro2 different Nozzle Profiles

Postby Vicky@Raise3D » Mon Sep 16, 2019 7:13 pm

You will need to Define the Nozzle Diameter under Printer Settings for your new template, and change Extruder Width under Advanced Settings. Printing Temperature, Printing Speed, Retraction Settings may need to be adjusted based on the printing result.

a.mi-official
Posts: 3
Joined: Tue Sep 10, 2019 12:35 pm

Re: Pro2 different Nozzle Profiles

Postby a.mi-official » Mon Sep 16, 2019 8:28 pm

Okay thank you, are there any templates available on the Raise site by any chance to use as a starting point?

User avatar
Vicky@Raise3D
Posts: 5525
Joined: Fri Mar 25, 2016 3:54 am

Re: Pro2 different Nozzle Profiles

Postby Vicky@Raise3D » Mon Sep 16, 2019 9:35 pm

Not at the moment. All the default templates we provide are tested based on our 0.4mm nozzle.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests