IdeaMaker feature requests

Raise3D is always listening. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Thu May 31, 2018 7:18 pm

Polarbehr wrote:Remaining filament on current roll

Add an option in the HMI that allows us to 'put a new roll' on the printer with 'x' weight. Then when we print a part decrement that weight from the roll. Weight is not 100% accurate but it would help with knowing how much is left on a roll and if the next print is close to using it all up.

Next option if this is implemented could have the printer open up a warning window that there may potentially not be enough filament if remaining on roll is within 10% of what the print requires.


We can see it will be a good feature. But what worry us are currently it will be very hard to achieve the accurate result to do the calculation. Lots of factors will affect the result, such as the estimated filament mount in gcode file is not that accurate, sometime user takes off the filament spool but set printer for loading or unloading, and usually not all the filament spools are starting use from a full spool (you use some and replace another for other use and replace the other half spool back for different tasks).
But anyway, we will try to figure it out, what can we help to achieve this.

jmel
Posts: 4
Joined: Tue Jun 05, 2018 5:51 pm

Re: IdeaMaker feature requests

Postby jmel » Tue Jun 05, 2018 5:59 pm

Ability to set extrusion width...

viewtopic.php?t=1094

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Wed Jun 06, 2018 6:48 am

jmel wrote:Ability to set extrusion width...

viewtopic.php?t=1094


1.png

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Thu Sep 20, 2018 8:04 pm

Stl..stl..stl... How about import in IM step, sat, sldprt ?
Useful? Why not..

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Sat May 25, 2019 6:18 am

I think the Printer Connect window is too large, has too big fonts. Take a fresh look ! ;-)

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Tue May 28, 2019 11:58 pm

DeX wrote:I think the Printer Connect window is too large, has too big fonts. Take a fresh look ! ;-)


The remote connection window should use the same resolution ratio and the same icons as touchscreen. Or you are looking for a window having less icons, such as only temperatures to show in a small window for quicklook. And expand the window to be a full window.

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Wed May 29, 2019 11:37 am

Vicky@Raise3D wrote:
DeX wrote:I think the Printer Connect window is too large, has too big fonts. Take a fresh look ! ;-)


The remote connection window should use the same resolution ratio and the same icons as touchscreen. Or you are looking for a window having less icons, such as only temperatures to show in a small window for quicklook. And expand the window to be a full window.


I meant this, see the pic plz.
When you have a few printers... you do not need to turn the pages a lot =)
Attachments
likethat).png

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Thu May 30, 2019 4:34 pm

It looks a little to crowded from our opinions.
What about an extra search box to find machine based on machine's name?

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Fri May 31, 2019 11:22 am

well, a little crowded yes. but just to show how much free place in that PrinterConnect window.
I haven't a tens of printers to have to search it. phew =)

Another thing if I may:
maybe display the name of the file being printed?
IMG_20190530_130808.jpg

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Fri May 31, 2019 11:41 pm

DeX wrote:well, a little crowded yes. but just to show how much free place in that PrinterConnect window.
I haven't a tens of printers to have to search it. phew =)

Another thing if I may:
maybe display the name of the file being printed?
IMG_20190530_130808.jpg


Will forward your suggestions to developing team.

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Thu Jun 25, 2020 9:48 am

I have long wanted to say that with an increase in the view, the control arrows disappear.
arrows1.JPG

closer...
arrows2.JPG

gone!

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Fri Jun 26, 2020 1:37 am

Seems it has been covered by the structures above it. If you rotate the view, you should be able to see it.

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Sun Jun 28, 2020 8:26 pm

Vicky@Raise3D wrote:Seems it has been covered by the structures above it. If you rotate the view, you should be able to see it.

or maybe you fix it some how ? =)
this always happens with a large approach to the object. And I need (this large approach ) to more accurately consider where to include the necessary settings.

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Sun Jun 28, 2020 8:28 pm

when idle moving to a new printing point, no retract is made and the plastic is smeared on the surface. will it ever be defeated? thank!

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Sun Jun 28, 2020 8:31 pm

it would be convenient to see these planes at the bottom of the table. Now through the grid is not visible.
bottomview.PNG

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Sun Jun 28, 2020 8:40 pm

a very useful feature in s3d is to look inside both the models and the finished gcode:
crosscection.PNG

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: IdeaMaker feature requests

Postby DeX » Sun Jun 28, 2020 8:43 pm

A very useful feature in s3d is to slice only the necessary sections of the model. Do not wait for the slicing of the entire model, but only a piece. (or you could slice just some process in s3d)
its great! true story. возьмите на карандаш =)
Attachments
clise only some.PNG
clise only some.PNG (5.65 KiB) Viewed 423 times
clise only some2.PNG

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Tue Jun 30, 2020 1:14 am

DeX wrote:when idle moving to a new printing point, no retract is made and the plastic is smeared on the surface. will it ever be defeated? thank!


Would you like to share the .idea, .gcode and .data files with us to see what is causingthe issue?

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Tue Jun 30, 2020 1:15 am

DeX wrote:it would be convenient to see these planes at the bottom of the table. Now through the grid is not visible.
bottomview.PNG


Thanks for your suggestion. We will add it into future versions.

User avatar
Vicky@Raise3D
Posts: 6872
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Tue Jun 30, 2020 1:15 am

DeX wrote:a very useful feature in s3d is to look inside both the models and the finished gcode:
crosscection.PNG


Thanks for your suggestion. It has been added into developing list.


Return to “Feature Requests, Ideas, Wishes”

Who is online

Users browsing this forum: No registered users and 1 guest