Bulidtak flex bed
Bulidtak flex bed
For this price range, we should get flex bed Buildtak. Like Prusa. No more issue with bed handle and fast and easy remove of prints.
Re: Bulidtak flex bed
That looks interesting. Please report your results.
And thank you.
-James
And thank you.
-James
Re: Bulidtak flex bed
Korni wrote:I do it ...
What do you mean I do it?
You are doing it? Are are ordering it?
-SCC
“One man's "magic" is another man's engineering. "Supernatural" is a null word.” -R.A.Heinlein
“One man's "magic" is another man's engineering. "Supernatural" is a null word.” -R.A.Heinlein
Re: Bulidtak flex bed
Korni wrote:Report my experiences as soon as I have them ..
Please do.
I'm interested to see how well it works with ABS and PETG if you test with it.
-SCC
“One man's "magic" is another man's engineering. "Supernatural" is a null word.” -R.A.Heinlein
“One man's "magic" is another man's engineering. "Supernatural" is a null word.” -R.A.Heinlein
Re: Bulidtak flex bed
I was ordered both flex beds... one from Buildtak other from Kickstarter... I will test it soon.
Re: Bulidtak flex bed
You can buy a similar product today: https://www.3d-easy.xyz/store/p2/Easy-Peelzy
I believe they were also a Kickstarter project. I am using Easy Peelzy on a small Monoprice Select Mini with success but haven't tried it on anything larger since there has already been enough online traffic on other forums that these non metal flex bed solutions can separate if you are printing something large and it starts to warp.
The biggest negative of the Easy Peelzy and the Ziflex is neither of them allow a bed temp of 100 C or higher so that rules out ABS and PC.
I do agree that a removable and flexible build surface would and should be a stock feature. I have the BuildTak FlexPlate system on order for the Pro2 and I expect it to work just as well as it does on my Qidi Tech.
I believe they were also a Kickstarter project. I am using Easy Peelzy on a small Monoprice Select Mini with success but haven't tried it on anything larger since there has already been enough online traffic on other forums that these non metal flex bed solutions can separate if you are printing something large and it starts to warp.
The biggest negative of the Easy Peelzy and the Ziflex is neither of them allow a bed temp of 100 C or higher so that rules out ABS and PC.
I do agree that a removable and flexible build surface would and should be a stock feature. I have the BuildTak FlexPlate system on order for the Pro2 and I expect it to work just as well as it does on my Qidi Tech.
Who is online
Users browsing this forum: No registered users and 0 guests