Hinge for top cover, available for purchase

[GWC]

Ok, Hello my fellow Raisers.

We listened to the group, and we are re-listing the Infinite Position Hinge System.

We adjusted the product offering and reduced the cost accordingly.

We sincerely thank those that have provided feedback!

Special thanks goes to Jeff Johnson for providing many suggestions.

Happy shopping!

For full product details and to purchase the Infinite Position Hinge System, please click on the link.

https://www.inspirenovations.com/produc ... ter-Covers

[EldRick]

Pictures, please. And the email address above is not correct...

[GWC]

Thank you very much. I will send you some information on the hinge later today. I appreciate you notifying us regarding the email and have since submitted an updated post with the correct email.

[EldRick]

A question: will it hold the top up while open just an inch or two? In what range of angles will it hold the cover up?

[GWC]

Yes, it will hold up the top, very close to 1” to 2”.

In theory it is infite position from 0, closed position to 110 full open.

Duty cycle is 20,000.

[Iamkar33m]

You have pictures?

[Casale8]

Pictures would make a world of a difference on who would be interested for security purposes.

[DrewPetitclerc]

Here is what I did to my N2+.
I cut 4 cheap wooden dowels to length and drilled and screwed them to the inside corners of the cover lifting it an appropriate amount to clear the filament tubes.

Then I took the package material that the cover came in (styrafoam) and cut out the bottom making a perfect slide over gap filler.

With the gap filler down I get a nice toasty warm chamber for those ABS prints.

And I can slide it up for access to the extruders and filament tubes.

If I want to print PLA just slide it up to the top and turn a little to rest on top for those long cool prints.

Cheap and easy, I'm all over that!

[EldRick]

Pictures would make a world of a difference on who would be interested...

Until we see a good set of pictures, there is no product offering. The lack of images, brand-new poster, anonymous (misspelled) email, etc. is starting to seem a little shady to me. And, of course, posting a few pix takes what? Maybe 10 minutes? 15?

I will send you some information on the hinge later today.

I received nothing in the last four days.

BTW, I'm only ragging on this because I'd really like to find such a product, but it sounds like this one got (sort of) announced a few weeks early, before any consideration of how to actually market or sell it.

[EldRick]

No information provided in nine days now.

[Noren]

Could it be this product?:
https://www.atome3d.com/products/r-capo ... 0898688138

[Casale8]

Could it be this product?:
https://www.atome3d.com/products/r-capo ... 0898688138

That's a nice upgrade - if you would call it that.

[kencfii]

sounds good - I agree some pics would be nice... I am sure it is great but we all have differing set ups...

Look forward!

[GWC]

Could it be this product?:
https://www.atome3d.com/products/r-capo ... 0898688138

Sorry I did not notify you earlier.

We have finally created the hinge system and pictures are provided along with links to the website.

[GWC]

Pictures, please. And the email address above is not correct...

Sorry for the wicked long delay.

We recently launched the Infinite Position Hinge System for the N2+ printer cover. Please check out the post along with a link to the website.

[GWC]

sounds good - I agree some pics would be nice... I am sure it is great but we all have differing set ups...

Look forward!

Sorry for the wicked long delay.

We recently launched the Infinite Position Hinge System for the N2+ printer cover. Please check out the post along with a link to the website.

[GWC]

Could it be this product?:
https://www.atome3d.com/products/r-capo ... 0898688138

That's a nice upgrade - if you would call it that.

Sorry for the wicked long delay.

We recently launched the Infinite Position Hinge System for the N2+ printer cover. Please check out the post along with a link to the website.

[GWC]

Pictures would make a world of a difference on who would be interested...

Until we see a good set of pictures, there is no product offering. The lack of images, brand-new poster, anonymous (misspelled) email, etc. is starting to seem a little shady to me. And, of course, posting a few pix takes what? Maybe 10 minutes? 15?

I will send you some information on the hinge later today.

I received nothing in the last four days.

BTW, I'm only ragging on this because I'd really like to find such a product, but it sounds like this one got (sort of) announced a few weeks early, before any consideration of how to actually market or sell it.

Sorry for the wicked long delay. You are spot on. Been developing products for 20+ years. Yes, initially, we suck at marketing products. We will get better with time.

We tried to integrate a hinge system without adding holes. But, after extensive R & D, the torque on the hinges is way too high.

We recently launched the Infinite Position Hinge System for the N2+ printer cover. Please check out the post along with a link to the website.