Retraction Settings?

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
User avatar
Vicky@Raise3D
Posts: 7160
Joined: Fri Mar 25, 2016 3:54 am

Re: Retraction Settings?

Postby Vicky@Raise3D » Fri Feb 14, 2020 7:16 pm

Here you go.
Attachments
Block Peg v2.stl
(495.79 KiB) Downloaded 108 times

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Retraction Settings?

Postby Michal80 » Tue Feb 18, 2020 8:09 pm

The block printout is very good. I still have a quality problem at the beginning of the layer. I tested many settings and still have no effect. I ordered a new Raise nozzle maybe this will solve the problem. You can set the model according to you, I will check it. Thank you very much for help.
Image Image
Attachments
model test..stl
(51.25 KiB) Downloaded 85 times
model test 2.stl
(74.59 KiB) Downloaded 85 times

User avatar
Vicky@Raise3D
Posts: 7160
Joined: Fri Mar 25, 2016 3:54 am

Re: Retraction Settings?

Postby Vicky@Raise3D » Wed Feb 19, 2020 2:15 am

Please check the attached file. It is sliced for PLA.
Attachments
model test..gcode
(749.47 KiB) Downloaded 93 times
model test..data
(40.99 KiB) Downloaded 103 times

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Retraction Settings?

Postby Michal80 » Wed Feb 19, 2020 8:29 pm

Thanks. Printed file, looks very good. Your settings are very good :) . Can you upload your template? I will check it on other models. I still don't understand where I am making a mistake.

User avatar
Vicky@Raise3D
Posts: 7160
Joined: Fri Mar 25, 2016 3:54 am

Re: Retraction Settings?

Postby Vicky@Raise3D » Wed Feb 19, 2020 10:31 pm

We just slice the models with default Pro2 1.75mm Standard template built into the latest version of ideaMaker.
Please make sure that you are using the latest version of ideaMaker and go to Standard template and click Restore Defaults button on the bottom.

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Retraction Settings?

Postby Michal80 » Thu Feb 20, 2020 5:50 pm

I am waiting for a new nozzle, I will check and share the effect

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Retraction Settings?

Postby Michal80 » Mon Feb 24, 2020 7:29 pm

I used the new Raise nozzle, program version 3.5.1 Beta, template standard default settings. The effect is far from expectations :( Please cut these models. I will print them and check the difference. I still don't know what I'm doing wrong. Thank you for your help. Image Image
Attachments
MODEL TEST2.stl
(54.38 KiB) Downloaded 72 times
MODEL TEST1.stl
(242.07 KiB) Downloaded 77 times

User avatar
Vicky@Raise3D
Posts: 7160
Joined: Fri Mar 25, 2016 3:54 am

Re: Retraction Settings?

Postby Vicky@Raise3D » Tue Feb 25, 2020 2:38 am

Please check the attached sliced files. We slice your file with default templates and modify the Start Point to be Fixed.
Image_20200224183525.png
Attachments
MODEL TEST2.gcode
(512.28 KiB) Downloaded 86 times
MODEL TEST1.gcode
(3.05 MiB) Downloaded 76 times
MODEL TEST2.data
(48.5 KiB) Downloaded 83 times
MODEL TEST1.data
(45.24 KiB) Downloaded 71 times

User avatar
Michal80
Posts: 38
Joined: Tue Jan 28, 2020 7:59 am

Re: Retraction Settings?

Postby Michal80 » Wed Feb 26, 2020 6:44 pm

I printed the models look much better. The inner side required a slight change in speed and retraction distance. I will test a few more models and let you know. Thanks again for your help.Image


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests