Slicing E value or flow rate percentage no change in Gcode

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Lorenzo infn
Posts: 2
Joined: Thu Aug 31, 2023 10:25 am

Slicing E value or flow rate percentage no change in Gcode

Postby Lorenzo infn » Fri Sep 01, 2023 8:50 am

When i sliced a objet in the slicing a want to set different amount of flow in different region of my object for example more flow percentage in the outer shell instead of infill.
I have tried different approach:
1) if i set different flow rate in the slicer in the Gcode file there is no change both in E value and in M221 value (Set flow percentage)
2) If i set different width percentage in the Gcode there is no change in E value in the Gcode, for example if i change from 100% to 200% line width there is no difference. Is there some advanced or hidden setting to enable/disable?

Lorenzo

Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests