ABS/TPU 100% Infill

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Posts: 3
Joined: Fri Aug 05, 2022 12:35 am

ABS/TPU 100% Infill

Postby timaga » Fri Aug 05, 2022 12:40 am

I'm printing nested cylinders in alternating materials with 100% infill, and was wondering if there is a way to make the prints faster by doing a continuous spiral for each layer instead of alternating diagonal infill like a traditional 3d print.

User avatar
Posts: 604
Joined: Thu Oct 28, 2021 10:43 pm

Re: ABS/TPU 100% Infill

Postby Ryan@Raise3D » Sat Aug 13, 2022 12:36 am

For this there are 2 potential options that will get us close to what you are looking for, but may be a bit more difficult.

1 You can change the infill to concentric and this could possibly help with print times, but with 100% infill this will still take a long time

2 You can try creating a custom Infill pattern that is a continuous spiral, but this is beyond the scope of what I can help with. I am showing where the infill pattern can be added that could theoretically do this.
Custom infill.png

Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests