ABS print

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
support
Posts: 2
Joined: Fri Jun 11, 2021 3:59 pm

ABS print

Postby support » Sun Jun 13, 2021 7:40 am

Hi Pro Raisers,

I face some difficulty to print a good part with large size.
Need your help and assistant for the setting.

Thanks and appreciate if able to solve this
Attachments
top surface (hole).jpg
side view circle become oval and internal rough.jpg
shrinkage.jpg
3 legs hollow pipe.STL
(2.78 MiB) Downloaded 9 times

User avatar
Steven@Raise3D
Posts: 420
Joined: Thu Dec 17, 2020 11:24 pm

Re: ABS print

Postby Steven@Raise3D » Tue Jun 15, 2021 1:58 am

support wrote:Hi Pro Raisers,

I face some difficulty to print a good part with large size.
Need your help and assistant for the setting.

Thanks and appreciate if able to solve this


Just to clarify the issues that you are referring to are the pillowing on the top surfaces of the model as well as the warping/deformation of the pipes? Are you printing this model with supports? Also what brand of ABS are you using to print this model?

support
Posts: 2
Joined: Fri Jun 11, 2021 3:59 pm

Re: ABS print

Postby support » Sat Jun 19, 2021 3:17 pm

Steven@Raise3D wrote:
support wrote:Hi Pro Raisers,

I face some difficulty to print a good part with large size.
Need your help and assistant for the setting.

Thanks and appreciate if able to solve this


Just to clarify the issues that you are referring to are the pillowing on the top surfaces of the model as well as the warping/deformation of the pipes? Are you printing this model with supports? Also what brand of ABS are you using to print this model?



Hi Steven,

I'm not sure what it call for the top surfaces of the model (it seems like hole to me :) ).
The bottom elbow hollow have some warping and deform.

1st print- I try to print without support, it only warping and deform
2nd print- Print with support (hole on top surfaces, warping and deform)

ABS - Polymaker
Support - HIPS

User avatar
Steven@Raise3D
Posts: 420
Joined: Thu Dec 17, 2020 11:24 pm

Re: ABS print

Postby Steven@Raise3D » Fri Jun 25, 2021 1:47 am

Would you be able to provide me with the Gcode files from both prints?

support wrote:
Steven@Raise3D wrote:
support wrote:Hi Pro Raisers,

I face some difficulty to print a good part with large size.
Need your help and assistant for the setting.

Thanks and appreciate if able to solve this


Just to clarify the issues that you are referring to are the pillowing on the top surfaces of the model as well as the warping/deformation of the pipes? Are you printing this model with supports? Also what brand of ABS are you using to print this model?



Hi Steven,

I'm not sure what it call for the top surfaces of the model (it seems like hole to me :) ).
The bottom elbow hollow have some warping and deform.

1st print- I try to print without support, it only warping and deform
2nd print- Print with support (hole on top surfaces, warping and deform)

ABS - Polymaker
Support - HIPS


Return to “Printing Settings”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 1 guest