Overhangs

[Bikeracer]

If someone could explain the overhang angle it would be appreciated.

Is it measured up from the horizontal or down away from the vertical if this makes any sense ?

[Steven@Raise3D]

If someone could explain the overhang angle it would be appreciated.

Is it measured up from the horizontal or down away from the vertical if this makes any sense ?

https://support.raise3d.com/ideaMaker/5 ... 5-439.html

Please see figure 12 in this guide as it explains how the overhang angle for support generation works.

[Bikeracer]

Thanks Steven for the helpful reply.