print settings for small gears and sharp corners

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
aminev
Posts: 5
Joined: Fri Oct 05, 2018 3:34 pm

print settings for small gears and sharp corners

Postby aminev » Sun Mar 29, 2020 7:24 am

in the earlier version, the outer contour was printed in a single line, and now the sharp edge is printed in a separate line
help who had the same problems
it used to be
2.png

now
1.png
IMG_20200329_111731.jpg
,

how to make it look like the first picture
2.png

User avatar
Vicky@Raise3D
Posts: 6529
Joined: Fri Mar 25, 2016 3:54 am

Re: print settings for small gears and sharp corners

Postby Vicky@Raise3D » Mon Mar 30, 2020 11:07 pm

There is a "Check Thin Wall" option under Other tab. Try uncheck it and see whether the result has been improved or not.

aminev
Posts: 5
Joined: Fri Oct 05, 2018 3:34 pm

Re: print settings for small gears and sharp corners

Postby aminev » Tue Mar 31, 2020 5:23 am

thanks for the help


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests