Can't print single extruder

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
JetForMe
Posts: 5
Joined: Fri Mar 27, 2020 4:18 am

Can't print single extruder

Postby JetForMe » Fri Mar 27, 2020 4:26 am

Hi. I'm printing this single-color model, and trying to print with only the left extruder. I've shut off all the settings I can find that would use the right extruder, but it still printed some internal structure using it. What else should I be looking for?

Thanks.

User avatar
Vicky@Raise3D
Posts: 6482
Joined: Fri Mar 25, 2016 3:54 am

Re: Can't print single extruder

Postby Vicky@Raise3D » Fri Mar 27, 2020 6:09 pm

Would you like to share you gcode file so that we can see which part of your model is still printed with the wrong nozzle as well as your settings?

JetForMe
Posts: 5
Joined: Fri Mar 27, 2020 4:18 am

Re: Can't print single extruder

Postby JetForMe » Mon Mar 30, 2020 3:17 am

Gcode attached. I thought I found another setting (Gap Filling/Allow filling gaps using single extrusion filling), but it still uses the right extruder.
Attachments
covid_mask.data
(87.67 KiB) Downloaded 15 times
covid_mask.gcode.zip
(3.59 MiB) Downloaded 22 times

User avatar
Vicky@Raise3D
Posts: 6482
Joined: Fri Mar 25, 2016 3:54 am

Re: Can't print single extruder

Postby Vicky@Raise3D » Tue Mar 31, 2020 5:54 pm

Seems your infill are printed by Right Extruder.
Please go to Infill tab under Advanced Settings. You should can see extruder selection there.


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests