Serious blobbing with ABS

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Patronus
Posts: 3
Joined: Mon Jul 01, 2019 11:09 am

Serious blobbing with ABS

Postby Patronus » Thu Jul 11, 2019 9:44 pm

I'm not new to 3d printing but new to Raise3d so I guess the learning curve starts again. I'm trying out my new machine and see a ton of blobbing on a part printed with:

- Raise3d ABS
- sliced in the latest version of Ideamaker
- using one of the factory Raise3d profiles (medium quality)
- printed on a brand new Pro 2 Plus

I would have expected that the material settings, at least for a controlled environment (their material, their slicer, their printer), would be dialled in near perfect like on my Ultimaker, Dremel & Markforged. But these blobs and uneven layer lines speak of some sloppy tuning or none at all for this material. Am I missing something?
Attachments
20190711_232244.jpg

User avatar
Vicky@Raise3D
Posts: 5364
Joined: Fri Mar 25, 2016 3:54 am

Re: Serious blobbing with ABS

Postby Vicky@Raise3D » Fri Jul 12, 2019 5:56 pm

Please make sure that your printer is loaded with the latest version of firmwares, RaiseTouch and Motion Board Firmware. The default settings in latest version of ideaMaker is tuned with the latest version firmwares.
https://www.raise3d.com/pages/download

Patronus
Posts: 3
Joined: Mon Jul 01, 2019 11:09 am

Re: Serious blobbing with ABS

Postby Patronus » Fri Jul 12, 2019 9:48 pm

My motion controller firmware version is the latest (0-0-6-6) and my RaiseTouch is also the latest (1.2.1.428) both updated by the reseller a few days ago when I purchased the machine. My version of Ideamaker is also the latest (3.4.2.3140)

My ABS filament is also brand new.

User avatar
Vicky@Raise3D
Posts: 5364
Joined: Fri Mar 25, 2016 3:54 am

Re: Serious blobbing with ABS

Postby Vicky@Raise3D » Tue Jul 16, 2019 12:51 am

Would you like to share your .idea, .gcode and .data fles with us to test?


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 1 guest