Raise3D Pro 2 starting gCode modification

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Posts: 2
Joined: Wed Feb 20, 2019 4:27 pm

Raise3D Pro 2 starting gCode modification

Postby martyn.corner » Wed Feb 27, 2019 11:03 am

Hi all,

New to the Raise3D pro 2 machine but I'm handy with gCode.

I didn't like the start up gcode for the purge it would just drag the waste to the print so I've changed it.

Now it wil Home - rise to 0.2 on the Z axis then move whilst extruding a thick beed for 30mm then do a fast wipe to break it, then start the job.

Very easy tested and it works well for me, just thought I'd share it for all.

G28 X0 Y0
G28 Z0
G92 E0
G1 X50 Y0 Z0.2 E29 F140
G1 X80 Y10 F{travel_xy_speed}
G92 E0
G1 F{travel_xy_speed}
M117 Printing...

Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 3 guests