PETG Profile

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
stugpanzer
Posts: 3
Joined: Fri Dec 29, 2017 1:18 am

PETG Profile

Postby stugpanzer » Mon Jan 14, 2019 9:15 pm

I am using a Wanhao D9 (among others) and I would like to print PETG but can't quite find the proper settings. I believe I might get away with a CR-10 profile but one that is using an all-metal hotend as my printer is. Does anybody have a profile they might like to share for ideaMaker for PETG?

tja
Posts: 113
Joined: Mon Oct 17, 2016 10:24 pm
Location: Essex, UK

Re: PETG Profile

Postby tja » Tue Jan 15, 2019 6:26 pm

Here's mine. http://forum.raise3d.com/viewtopic.php?f=8&t=11574#p38851

I print with PETG most of the time, it's a great material to print with when you get the hang of it

stugpanzer
Posts: 3
Joined: Fri Dec 29, 2017 1:18 am

Re: PETG Profile

Postby stugpanzer » Tue Jan 15, 2019 10:32 pm

Thank you I will give it a try....


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests