Z-banding ...NEED HELP!

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
Posts: 15
Joined: Mon Mar 05, 2018 12:06 pm

Z-banding ...NEED HELP!

Postby tulipua » Tue Dec 25, 2018 8:41 am

N2 Plus with Bondtech and fans upgrade like Pro2
48 hrs for checking no ideas more
maybe hardware on the bottom printer...I don't know...

- I tried different brands of Filament and measured diameters.
- printed with parts fan off or on doesn't make a difference
- PID tuned the hotend
- cleaned extruder Housing
- checked spring tension of extruder
- tried different extrusion multipliers
- Checked voltages on stepper drivers (0.5v on the extruders, as should be after the bondtech upgrade)
- Heated bed is level.
tried different printing temperatures and speeds

User avatar
Posts: 4947
Joined: Fri Mar 25, 2016 3:54 am

Re: Z-banding ...NEED HELP!

Postby Vicky@Raise3D » Wed Dec 26, 2018 7:23 pm

Did you start having similar issue after installing Bondtech or you had similar before with original extruder?
Have you tuned the E-step value after installing Bondtech? That will affect your extrusion.

Posts: 15
Joined: Mon Mar 05, 2018 12:06 pm

Re: Z-banding ...NEED HELP!

Postby tulipua » Thu Dec 27, 2018 8:57 am

No, all was ok couple month.
I did everything according to the instructions (https://www.bondtech.se/wp-content/uplo ... D-V2.1.pdf)

Return to “Printing Settings”

Who is online

Users browsing this forum: Bing [Bot], GQQSER, red and 2 guests