somehow my printing lines are not joining up. It seems that filament is already retracted before it can even reach the end point before retraction should happen.
I thought this would be a retraction problem, therefore I already lowered it to 0.3 mm. Still no usable results.
I beg you guys to help me with this. The banana is just a silly over the weekend test print, but this has impacts on our work related stuff.
- Printer: Raise3D E2
Filament: PLA PolyMaker PolyTerra
Nozzle: 0.6 mm
Temperature: 205 °C, 50 °C
Here is the link to the GCode: https://drive.google.com/file/d/1-1v7BumGjLL7Ylxp20c_2b93PniZ393s/view?usp=sharing
Here is the link to the STL: https://thangs.com/designer/MakerTales/3d-model/Flexy%20Banana-903901
Thank you very much!
I am looking forward to your suggestions!