what's the difference between printing speed and infill speed

Share your successful printing settings with others here. If you have any question about the parameters or printing skills of some filament, please find here.
xuguo
Posts: 8
Joined: Wed Aug 28, 2019 9:08 pm

what's the difference between printing speed and infill speed

Postby xuguo » Tue Jan 07, 2020 3:53 pm

Hello all,

Does anyone know what the difference between the printing speed and infill speed is?

thank you

Jetguy
Posts: 2837
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: what's the difference between printing speed and infill speed

Postby Jetguy » Tue Jan 07, 2020 4:38 pm

Printing speed is the global speed used when no other specific feed rate is defined.
Infill being s specifically defined region of the model- and it's specific associated feed rate.
Other examples would be shell, first layer, bridges, roofs, floors, support and so on that have defined values or when not defined- default to "printing speed".

xuguo
Posts: 8
Joined: Wed Aug 28, 2019 9:08 pm

Re: what's the difference between printing speed and infill speed

Postby xuguo » Fri Jan 10, 2020 3:14 pm

Jetguy wrote:Printing speed is the global speed used when no other specific feed rate is defined.
Infill being s specifically defined region of the model- and it's specific associated feed rate.
Other examples would be shell, first layer, bridges, roofs, floors, support and so on that have defined values or when not defined- default to "printing speed".


Oh. OK. Thank you for your explain.


Return to “Printing Settings”

Who is online

Users browsing this forum: No registered users and 2 guests