Page 1 of 1

Axe Z Bloked Raise Pro 2

Posted: Tue Nov 23, 2021 11:23 am
by Guillaume
Hello I'm french. And this text is translated by google translate.

Thank you in advance for your support.

Following a Z-shaped home, the plateau remains frozen and no longer wants to descend. The engine “growls”.

I disassembled the Z belt, but the two screws stuck. The blockage does not come from the Z motor.

Do you have a track, before I disassemble other mechanical parts?

Re: Axe Z Bloked Raise Pro 2

Posted: Tue Nov 23, 2021 11:50 pm
by Ryan@Raise3D
Can you send me some pictures of how you currently have the z-axis set up so I can see how far it has been disassembled?

Re: Axe Z Bloked Raise Pro 2

Posted: Wed Nov 24, 2021 10:13 am
by Guillaume
Bonjour, voir pièce jointe. Merci

Re: Axe Z Bloked Raise Pro 2

Posted: Tue Nov 30, 2021 10:46 pm
by Ryan@Raise3D
Thank you for the pictures. The issue here could be the silver coupler just under the z-axis motor and I recommend checking to see if this has broken.

as for the belt, I do not recommend ever removing it as it is very difficult to slip back on as it requires slightly stretching the belt and I recommend putting it back on before making any further adjustments.