Page 1 of 1

I apologize for using this as the first post.

Posted: Sun Jun 16, 2019 12:01 pm
by FDM-concept
I apologize for using this as the first post.

But, i think this is the only good place for my question.

I have been working with creality printers for 2 years now.

i now have 3x ender3, 1xcr10 and 1cr10s5

and I am looking for an upgrade that is more reliable.

The Raise3D n2 Pro has been in my mind for some time.

I mainly print models of houses and some useful prints

for now I only work with PLA, but for the usable prints I want to switch to ABS and Nylon

I do not need the pro plus since I almost never exceed 250 mm in height.

I am looking for a printer with at least 2 colors / nozzle. that delivers very beautiful prints and is reliable to work 24/24. my last large print on the CR10S5 took 280u.

are you satisfied with the printer, or do I invest better in something else with my budget??

thank you in advance.

Re: I apologize for using this as the first post.

Posted: Wed Jun 19, 2019 3:26 pm
by crimsonyoshi
Have a look at Jetguy's post history as he lists a few shortcomings with these printers. Personally, I've used it to prototype wind turbines and wheels for robotic lawnmowers without too many issues. It really comes down to what you're trying to accomplish with a printer, how fine you need the resolution and accuracy, and so on.