Axe Z Bloked Raise Pro 2

Any topics that don't fall into above categories. Please note that your thread may be moved to other discussion boards.
Guillaume
Posts: 2
Joined: Tue Nov 23, 2021 11:09 am

Axe Z Bloked Raise Pro 2

Postby Guillaume » Tue Nov 23, 2021 11:23 am

Hello I'm french. And this text is translated by google translate.

Thank you in advance for your support.

Following a Z-shaped home, the plateau remains frozen and no longer wants to descend. The engine “growls”.

I disassembled the Z belt, but the two screws stuck. The blockage does not come from the Z motor.

Do you have a track, before I disassemble other mechanical parts?

User avatar
Ryan@Raise3D
Posts: 99
Joined: Thu Oct 28, 2021 10:43 pm

Re: Axe Z Bloked Raise Pro 2

Postby Ryan@Raise3D » Tue Nov 23, 2021 11:50 pm

Can you send me some pictures of how you currently have the z-axis set up so I can see how far it has been disassembled?

Guillaume
Posts: 2
Joined: Tue Nov 23, 2021 11:09 am

Re: Axe Z Bloked Raise Pro 2

Postby Guillaume » Wed Nov 24, 2021 10:13 am

Bonjour, voir pièce jointe. Merci
Attachments
IMG_0046.jpg
IMG_0045.jpg

User avatar
Ryan@Raise3D
Posts: 99
Joined: Thu Oct 28, 2021 10:43 pm

Re: Axe Z Bloked Raise Pro 2

Postby Ryan@Raise3D » Tue Nov 30, 2021 10:46 pm

Thank you for the pictures. The issue here could be the silver coupler just under the z-axis motor and I recommend checking to see if this has broken.

as for the belt, I do not recommend ever removing it as it is very difficult to slip back on as it requires slightly stretching the belt and I recommend putting it back on before making any further adjustments.


Return to “Others”

Who is online

Users browsing this forum: No registered users and 2 guests