IdeaMaker feature requests

Raise3D is always listening. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
clint_45
Posts: 1
Joined: Wed Dec 23, 2020 9:16 pm

Re: IdeaMaker feature requests

Postby clint_45 » Wed Dec 23, 2020 9:21 pm

Hi

I am unsure if this idea have been proposed earlier, couldn't find anything relating to it anyway.

I whould like to have the posibility to change the name of my slicer templates.

Best regards
Clint

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Thu Dec 24, 2020 1:13 am

You can copy the name in Edit. If you are under Advanced, you can go Simple mode from the left bottom corner.

DLS79
Posts: 12
Joined: Wed Mar 25, 2020 7:57 pm

Re: IdeaMaker feature requests

Postby DLS79 » Sat Dec 26, 2020 7:40 am

A new version of PrusaSlicer will soon be released and it will have a new solid infill pattern that I would very very much like to see in IdeaMaker.

The goal of the new pattern called monotonic is to improve the surface finish/look of top surfaces with holes in them. I have seen some friends test prints, and it plus ironing leads to amazing looking top layers.

You can see it in action here.
https://www.youtube.com/watch?t=40&v=ExX_X0qnRS4

You can read about how its implemented here it here.
https://github.com/prusa3d/PrusaSlicer/ ... 3.0-alpha1

Here is a high resolution image link comparison to a rectilinear top layer.
Image

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Tue Dec 29, 2020 1:16 am

Thanks for your suggestions. We have got similar request before. It has already been added into developing list.

mastersapo
Posts: 14
Joined: Sat May 26, 2018 3:13 am

Re: IdeaMaker feature requests

Postby mastersapo » Sun Jan 03, 2021 7:41 pm

I suggest the addition of keep out zones / support blocking zones for supports similar to CURA.
https://support.ultimaker.com/hc/en-us/ ... maker-Cura

Labirynt
Posts: 109
Joined: Thu Jun 25, 2020 9:08 am

Re: IdeaMaker feature requests

Postby Labirynt » Sun Jan 03, 2021 7:54 pm

mastersapo wrote:I suggest the addition of keep out zones / support blocking zones for supports similar to CURA.
https://support.ultimaker.com/hc/en-us/ ... maker-Cura

what's wrong with actual one?

modifier.PNG


and gcode in preview on this:
modifier_preview.PNG

DeX
Posts: 282
Joined: Fri Apr 21, 2017 6:56 am
Location: Saint-Petresburg, RU

Re: IdeaMaker feature requests

Postby DeX » Wed Jan 06, 2021 6:39 pm

вообще, конечно, не понятно чем там думают создатели слайдеров, если такой момент как равномерное заполнение поверхности лишь с ГОДАМИ приходит в жизнь. это ж после первой печати плоской детали стало понятно!

leonhart8888
Posts: 81
Joined: Tue Jul 07, 2020 12:02 am

Re: IdeaMaker feature requests

Postby leonhart8888 » Sat Jan 09, 2021 10:23 pm

I have a feature request for supports.

It would be great if I could click-drag to delete multiple supports rather than having to click on each pillar individually.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Tue Jan 12, 2021 1:39 am

Adding Group Select to simplify deleting process is under developing.

leonhart8888
Posts: 81
Joined: Tue Jul 07, 2020 12:02 am

Re: IdeaMaker feature requests

Postby leonhart8888 » Thu Jan 14, 2021 5:16 pm

+1 for monotonic infill, that would be amazing.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Fri Jan 15, 2021 1:30 am

Thanks for your suggestions!
The feature has been added into developing list.

DeX
Posts: 282
Joined: Fri Apr 21, 2017 6:56 am
Location: Saint-Petresburg, RU

Re: IdeaMaker feature requests

Postby DeX » Fri Jan 29, 2021 7:43 am

АААААААААААА!!!!!!!!!!!
when you open an idea file, you really want the slicing settings to be loaded from it !? Why the hell should I keep it ?!

yeah, I can import them from a file, but this is completely unnecessary / !!!
ааааааааааа

SelkisFR
Posts: 7
Joined: Fri Sep 25, 2020 11:13 pm

Re: IdeaMaker feature requests

Postby SelkisFR » Thu Feb 11, 2021 3:59 pm

Hi Vicky, do you have any plane to have a monotonous infill for top layers to avoid having marks when the nozzle change its direction when meeting a hole. Kinda like PrusaSlicer have. Many thanks for this amazing slicer ;)

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Fri Feb 12, 2021 12:38 am

SelkisFR wrote:Hi Vicky, do you have any plane to have a monotonous infill for top layers to avoid having marks when the nozzle change its direction when meeting a hole. Kinda like PrusaSlicer have. Many thanks for this amazing slicer ;)


Thanks for your suggestions!
The feature has been already added into developing list.

User avatar
Pedro Luis
Posts: 30
Joined: Thu May 28, 2020 9:29 pm
Location: Alicante, España

Re: IdeaMaker feature requests

Postby Pedro Luis » Thu Feb 25, 2021 9:37 pm

walshlg wrote:5. Add a chime when print is finished


I have solved installing a button via radio:
https://es.aliexpress.com/item/32949087408.html
I have soldered a normally open reed contact to the doorbell pushbutton contacts

Code: Select all

In GCode> End GCode:

G91; Relative Positioning
G1 F3000 E-2; Produces anti-Ooze retraction
G1 Z + 0.5 E-5 X20 Y20 F900.00; Travel 20mm in X and Y
M150 U200; Put the led in green
M104 S0; Turn off the Hot-End
M140 S0; Turn off the bed heater
M107; Turn off fans
G90; Set Absolute positioning
G0 F8000 Y310, Travel to Y310 to activate the chime   <-------
G4 P1000; Sets a 1 second pause  <-------
M150 R0 U0 B0; Turn off the led
G28 X0 Y0; Home XY


When I don't want the chime to sound, I remove a battery.
In the GCode End, I have injected 2 lines,
the first makes the extruder travel to the end on the Y axis (for activate the reed contact)
G0 F8000 Y310
You must find which is the end-point on the Y axis of your printer
Another second line sets a 1 second pause
G4 P1000; Sets a 1 second pause
Then it returns to origin X-Y
Attachments
IMG_20210225_221008311.jpg

Polar
Posts: 9
Joined: Sat Feb 13, 2021 12:25 pm

Re: IdeaMaker feature requests

Postby Polar » Wed Mar 03, 2021 9:59 pm

1. I would love to see something like a calculated value option which Cura has.
For example when changing the default print speed that the ideal combination will be calculated and set by ideamaker.

2. Would love to see the Cura Cross 3D infill pattern in Ideamaker. This infill prints very fast and safes a lot filament compared to standard infill patterns.

3. The place seam on option is not very clear explained. I think Cura has explained this option much better and also I would suggest to add something like their seam corner preference smart hiding option. Whenever possible at the inside of the model prefered.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Thu Mar 04, 2021 5:24 am

1. The Calculated Value's display will be conflicted with the current tabbed interface. But we are trying to optimize the whole interface, we will take this into consideration.

2. We will add this request into developing list. For the current use, you can try Gyroid or Adaptie Infill.

3. Would you like to advise more information about which part is not explained very well?
Smart Hiding most likely is using reflex corner for most cases as the first option. When selecting Reflex or Convex Corner in ideaMaker, ideaMaker will use reflex croner as the first option too.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Wed Apr 07, 2021 4:24 am

Thanks for the information. We will add your request into developing list.

Bli
Posts: 3
Joined: Wed Apr 07, 2021 10:04 am

Re: IdeaMaker feature requests

Postby Bli » Wed Apr 07, 2021 10:08 am

I would like to see a feature where you could choose extruder (left/right) in the Per-layer settings - for instance to make a model with horizontal stripes.
It would also be great to be able to print only outer perimeter with another extruder.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: IdeaMaker feature requests

Postby Vicky@Raise3D » Thu Apr 08, 2021 2:41 am

ideaMaker doesn't have an option to define which extruder to print outer shells. We can add the request into developing list.


Return to “Feature Requests, Ideas, Wishes”

Who is online

Users browsing this forum: No registered users and 1 guest