Bed to front when pausing print

Raise3D is always listening. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
kurtzr
Posts: 1
Joined: Wed Mar 17, 2021 3:46 pm

Bed to front when pausing print

Postby kurtzr » Wed Mar 17, 2021 4:22 pm

Hi all,

Is there any way to get the print bed to idle at the front of the enclosure rather than tucked away in the back when an active print is paused. Usually I pause things in order to address some issue with the print. It really doesn't make any sense to have the build plate position itself in the most inaccessible area.

Thanks!

Bikeracer
Posts: 137
Joined: Sun Jun 28, 2020 11:54 am

Re: Bed to front when pausing print

Postby Bikeracer » Mon Mar 29, 2021 9:51 am

Plus 1 on that suggestion.

Online
User avatar
Vicky@Raise3D
Posts: 8342
Joined: Fri Mar 25, 2016 3:54 am

Re: Bed to front when pausing print

Postby Vicky@Raise3D » Tue Mar 30, 2021 5:15 am

We will take your suggestions and add moving axes during pause into developing list for future versions.
Thanks for your support!

ribo10
Posts: 1
Joined: Wed Jan 12, 2022 5:37 pm

Re: Bed to front when pausing print

Postby ribo10 » Wed Jan 12, 2022 5:39 pm

This still has not been addressed and to be clear it is a fix not a preference. It NEVER should have been put to the back. FIX IT.

User avatar
Ryan@Raise3D
Posts: 220
Joined: Thu Oct 28, 2021 10:43 pm

Re: Bed to front when pausing print

Postby Ryan@Raise3D » Fri Jan 14, 2022 1:16 am

I am sorry that it has not been addressed as of yet, but our development team is aware of this and it should be addressed in a future version of the firmware.


Return to “Feature Requests, Ideas, Wishes”

Who is online

Users browsing this forum: No registered users and 1 guest