Notification of "print complete"

Raise3D is always listening. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
EarlGrey
Posts: 2
Joined: Thu Aug 01, 2019 9:54 am

Notification of "print complete"

Postby EarlGrey » Sun May 03, 2020 1:47 pm

Don't think I've seen this request before but delete if already on here......
Would love to see a feature where a notification that "printing is complete" is sent to phone possibly with a sound notification?; maybe via the RaiseCloud app?

Jetguy
Posts: 3107
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: Notification of "print complete"

Postby Jetguy » Tue May 12, 2020 2:48 pm

I would say cloud already can send. Your phone then chooses the notification tone.
"Completed" and can also message if a pause is invoked (filament out or a planned pause in the print file)
Screen Shot 2020-05-12 at 10.46.52 AM.png

User avatar
SSchueerholz
Posts: 1
Joined: Thu Apr 30, 2020 9:28 pm

Re: Notification of "print complete"

Postby SSchueerholz » Thu Jun 18, 2020 5:48 am

I too would like to see an additional notification "Print complete" when the printer has completed printing the GCODE file. The existing "Job complete" is only sent after the Job success/failure is entered at the touch screen. Currently there is no notification when the printed model is done and ready to be removed from the printer.

User avatar
Vicky@Raise3D
Posts: 7170
Joined: Fri Mar 25, 2016 3:54 am

Re: Notification of "print complete"

Postby Vicky@Raise3D » Fri Jun 19, 2020 4:03 am

Thanks for your suggestions! We have added your suggestions into developing list.

User avatar
meelo88
Posts: 12
Joined: Sat Apr 18, 2020 1:50 pm

Re: Notification of "print complete"

Postby meelo88 » Fri Aug 07, 2020 3:51 am

I would like to add my vote to have a notification when the printer finishes printing the GCODE as I am not always watching my Raisecloud and would like to reduce downtime and not have to set my own timer on my phone or watch to keep tabs on my printer.
Printers: Raise3D E2 - MatterHackers Pulse (B Frame)

Labirynt
Posts: 31
Joined: Thu Jun 25, 2020 9:08 am

Re: Notification of "print complete"

Postby Labirynt » Fri Aug 07, 2020 11:57 pm

meelo88 wrote:I would like to add my vote to have a notification when the printer finishes printing the GCODE as I am not always watching my Raisecloud and would like to reduce downtime and not have to set my own timer on my phone or watch to keep tabs on my printer.


5 minutes after printer finish job, you should received email:
"The 3D Printer(*******) has remained done for 5 minutes"

User avatar
Vicky@Raise3D
Posts: 7170
Joined: Fri Mar 25, 2016 3:54 am

Re: Notification of "print complete"

Postby Vicky@Raise3D » Tue Aug 11, 2020 7:27 pm

meelo88 wrote:I would like to add my vote to have a notification when the printer finishes printing the GCODE as I am not always watching my Raisecloud and would like to reduce downtime and not have to set my own timer on my phone or watch to keep tabs on my printer.


This feature is under developing at the moment. For the moment, you can use Email Notification feature under Printer Settings to setup notification, if you are the owner of the team.

User avatar
meelo88
Posts: 12
Joined: Sat Apr 18, 2020 1:50 pm

Re: Notification of "print complete"

Postby meelo88 » Thu Aug 13, 2020 2:23 pm

Thank you. I just set up the email again, I had turned it off after I enabled push notifications thinking it would do something similar. I will use this email until the feature is available.
Printers: Raise3D E2 - MatterHackers Pulse (B Frame)

User avatar
meelo88
Posts: 12
Joined: Sat Apr 18, 2020 1:50 pm

Re: Notification of "print complete"

Postby meelo88 » Thu Aug 13, 2020 4:57 pm

This is interesting, when the email notification is turned on the Raise3D iOS app sends me a notification of the printer in "Done" state as well as an email. It did not do this Push notification before.
Printers: Raise3D E2 - MatterHackers Pulse (B Frame)

User avatar
Vicky@Raise3D
Posts: 7170
Joined: Fri Mar 25, 2016 3:54 am

Re: Notification of "print complete"

Postby Vicky@Raise3D » Fri Aug 14, 2020 6:20 pm

We have fixed some bugs related to notification. If it doesn't work properly on your end, please feel free to let us know.


Return to “Feature Requests, Ideas, Wishes”

Who is online

Users browsing this forum: No registered users and 1 guest