Adjust overall speed from the tune menu

Raise3D is always hearing. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
seattleprinting
Posts: 5
Joined: Thu Apr 18, 2019 10:30 pm

Adjust overall speed from the tune menu

Postby seattleprinting » Fri Apr 19, 2019 2:27 pm

One feature I really love and miss from my Robox printer is the ability to adjust the speed on the fly. It was a sliding scale that started at 100% and allowed you to go down to 25 and up to 150. It simply scaled the individual functions by that overall amount.

So if perimeter was 40 and infill was 50, sliding the speed scale to 110% would adjust them to 44 and 55.

Thoughts?

Neil

User avatar
Vicky@Raise3D
Posts: 5455
Joined: Fri Mar 25, 2016 3:54 am

Re: Adjust overall speed from the tune menu

Postby Vicky@Raise3D » Fri Apr 19, 2019 5:48 pm

You also can adjust the overall print speed on our touchscreen as well. It is called Feedback located under Tune tab.
https://support.raise3d.com/raisetouch/ ... ent_id=729

seattleprinting
Posts: 5
Joined: Thu Apr 18, 2019 10:30 pm

Re: Adjust overall speed from the tune menu

Postby seattleprinting » Tue Apr 23, 2019 4:05 pm

Thanks Vicky for pointing that out! Based on the name, I assumed that it controlled extruder speed (retraction speed, etc.) Renaming it to speed instead of Feed Rate may make it a little more intuitive.

Neil


Return to “Feature requests, ideas, wishes”

Who is online

Users browsing this forum: No registered users and 1 guest