Adjusting Z height while printing

Raise3D is always listening. If you have a feature requested related to our product, or if you have new ideas that need attention from the community, please post here.
rbien1
Posts: 4
Joined: Tue Dec 14, 2021 6:34 pm

Re: Adjusting Z height while printing

Postby rbien1 » Thu Sep 08, 2022 7:33 pm

Live z-offset adjust for 1st layer is still not implemented? It is such a pain not having this feature. On a $ 5000.- printer! Every other printer has it. And No, z-homing is not repeatable enough, besides different bed temperature setting will have an effect on the z-offset gap where it needs to be corrected. Please implement this essential feature !

User avatar
Ryan@Raise3D
Posts: 604
Joined: Thu Oct 28, 2021 10:43 pm

Re: Adjusting Z height while printing

Postby Ryan@Raise3D » Thu Sep 08, 2022 11:56 pm

Thank you for your suggestion I will go ahead and forward this to our development team so they can see if this is a feature they can implement.


Return to “Feature Requests, Ideas, Wishes”

Who is online

Users browsing this forum: No registered users and 1 guest