Filaments

Show off your prints, mods, etc.
ediukill
Posts: 3
Joined: Tue Jul 26, 2016 4:10 pm

Filaments

Postby ediukill » Sat Jul 30, 2016 9:50 pm

Hi, I'd like to start a thread with everyone's favorite filaments. I think everybody will like to have a compilation of filaments. I re-edit my post to compile all the filaments. Post it like this:

Filament name: R3D Premium PLA
Type (ABS, PLA, PETG,...): PLA
Purchased Website: http://www.raise3d.com
Purchased price (specify US/CAD/EU): $29.99
Extruding temp: 205-215C
Bed temp: 40-60C

Filament name: Esun ABS
Type (ABS, PLA, PETG,...): ABS
Purchased Website: Hobbyking
Purchased price (specify US/CAD/EU): £11.45
Extruding temp: 250-260c
Bed temp: 110c

Filament name: Esun PETG (Crystal Blue)
Type (ABS, PLA, PETG,...): PETG
Purchased Website: Amazon
Purchased price (specify US/CAD/EU): $26USD
Extruding temp: 245
Bed temp: 95c
Retraction 30mm/s at 1.0mm
IM flowrate at 100% but set Filament to PETG on main menu and that has a 95% flowrate - i assume it's all connected
No Raft ever (cant get it off ... maybe i need better settings?)
Last edited by ediukill on Tue Aug 09, 2016 11:44 pm, edited 4 times in total.

User avatar
Vicky@Raise3D
Posts: 6973
Joined: Fri Mar 25, 2016 3:54 am

Re: Filaments

Postby Vicky@Raise3D » Tue Aug 02, 2016 1:46 am

My favorite must be our premium PLA. :D It works so well and has wide temperature range.

Filament name: R3D Prmium PLA
Type (ABS, PLA, PETG,...): PLA
Purchased Website: www.raise3d.com
Purchased price (specify US/CAD/EU): $29.99
Extruding temp: 205-215C
Bed temp: 40-60C

User avatar
Wibb
Posts: 70
Joined: Wed Mar 30, 2016 5:07 pm

Re: Filaments

Postby Wibb » Tue Aug 02, 2016 6:27 am

Filament name: Esun ABS
Type (ABS, PLA, PETG,...): ABS
Purchased Website: Hobbyking
Purchased price (specify US/CAD/EU): £11.45
Extruding temp: 250-260c
Bed temp: 110c

NewbPilot
Posts: 287
Joined: Tue Jul 26, 2016 2:16 am
Location: West Palm Beach, FL
Contact:

Re: Filaments

Postby NewbPilot » Tue Aug 09, 2016 11:23 pm

Best results so far from eSun PETG - Crystal Blue. It's printed perfectly every single time

Filament name: Esun PETG (Crystal Blue)
Type (ABS, PLA, PETG,...): PETG
Purchased Website: Amazon
Purchased price (specify US/CAD/EU): $26USD
Extruding temp: 245
Bed temp: 95c
Retraction 30mm/s at 1.0mm
IM flowrate at 100% but set Filament to PETG on main menu and that has a 95% flowrate - i assume it's all connected
No Raft ever (cant get it off ... maybe i need better settings?)


Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest