Page 1 of 1

Friction free spool holder

Posted: Sat Jun 06, 2020 10:57 am
by Kurtyard
i chose a design without adjustable holder, to keep enough clearance between spool and door. I made some adapters for most common diameters instead.

Re: Friction free spool holder

Posted: Thu Sep 02, 2021 1:32 am
by Aquinas
Here's another one on ebay, but it is a little more complicated. I think these are a must for printer TPU,
https://www.ebay.com/itm/224592490613?h ... SwEqdhLmbL