Modded filamentbox and top-add on

Show off your prints, mods, etc.
Sunshine
Posts: 52
Joined: Mon Nov 26, 2018 12:53 pm

Modded filamentbox and top-add on

Postby Sunshine » Tue Jan 22, 2019 11:39 am

I got inspired by a another Pro2 user who had constructed a storage box for his filament that was inserted on the right side of the printer. I constructed a similar box using plexi glas where I can load and store filament to the printer.

I also hightened the top lid so that the guide tubes wouldn't press against it. This is something I hope Raise is looking into in their future printers.
Attachments
IMG_0460.JPG

JGuzman
Posts: 2
Joined: Tue Jan 22, 2019 2:23 pm

Re: Modded filamentbox and top-add on

Postby JGuzman » Tue Jan 22, 2019 3:20 pm

I like this idea, if we get to keep ours I am going to look into building something very similar as I dont like how they are so close to each other from the factory. I will look to include a dehumidifier for the PVA though.

Sunshine
Posts: 52
Joined: Mon Nov 26, 2018 12:53 pm

Re: Modded filamentbox and top-add on

Postby Sunshine » Wed Jan 23, 2019 9:07 am

JGuzman wrote:I like this idea, if we get to keep ours I am going to look into building something very similar as I dont like how they are so close to each other from the factory. I will look to include a dehumidifier for the PVA though.


That is the next thing on my to-do-list, as well as adding a thermo and hygrometer. As I live in Sweden, our humidity ranges from 0-100 over the year.


Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 2 guests