I wanted to share our recent success in constructing a water cooled extruder head setup at our shop. We print a lot of ABS parts for weeks at a time and sometimes have issues with heat creep up the throat tube of the extruder block. This system keeps it cool.
Video Tour: https://www.youtube.com/watch?v=UOKySspv4Xc
If I had to design the drip tray again I would leave more room above the pump for the signage, but I'm happy with how everything turned out using Paul English's machined copper parts and instructions as a loose guide to our system. We printed the drip tray with ABS and painted it.
You can order the copper extruder cooling assembly by emailing this guy: firstname.lastname@example.org
- Water pump kit with fan ect.: https://www.filastruder.com/products/e3 ... ooling-kit
- Flow indicator: "https://www.amazon.com/Bel-Art-19937-0001-Indicators-Paddle-Tubing/dp/B00NG1ZFWI/ref=sr_1_2?crid=1SITZXH0CKID5&dchild=
- Tubing (slips right into pump tubing) - https://www.amazon.com/Wall-Superthane- ... ial&sr=1-1
- Light switch and 12v power supply. You can also power off the extruder board where the old cooling fan plugged in, but we wanted something we could turn on or off independently of the printer.
I'm happy to answer any questions about installation.
Show off your prints, mods, etc.
2 posts • Page 1 of 1
I really like your setup there and would like to make something similiar. It looks like you made your heat exchangers out of copper and was wondering if you had a pdf print or photo with print dimensions. I am a machinist by trade and would like to make some myself. Thanks for your help in the matter and thanks in advance.
Who is online
Users browsing this forum: No registered users and 2 guests