"Stay Cool" - Water Cooled Extruder System

Show off your prints, mods, etc.
FoamGuy2021
Posts: 1
Joined: Tue Apr 13, 2021 6:39 pm

"Stay Cool" - Water Cooled Extruder System

Postby FoamGuy2021 » Tue Apr 13, 2021 7:17 pm

I wanted to share our recent success in constructing a water cooled extruder head setup at our shop. We print a lot of ABS parts for weeks at a time and sometimes have issues with heat creep up the throat tube of the extruder block. This system keeps it cool.

Video Tour: https://www.youtube.com/watch?v=UOKySspv4Xc

If I had to design the drip tray again I would leave more room above the pump for the signage, but I'm happy with how everything turned out using Paul English's machined copper parts and instructions as a loose guide to our system. We printed the drip tray with ABS and painted it.

You can order the copper extruder cooling assembly by emailing this guy: penglish@englishmfginc.com

Parts:
- Water pump kit with fan ect.: https://www.filastruder.com/products/e3 ... ooling-kit

- Flow indicator: "https://www.amazon.com/Bel-Art-19937-0001-Indicators-Paddle-Tubing/dp/B00NG1ZFWI/ref=sr_1_2?crid=1SITZXH0CKID5&dchild=
1&keywords=inline+flow+indicator&qid=1615927130&sprefix=in+line+flow+indic%2Caps%2C195&sr=8-2"

- Tubing (slips right into pump tubing) - https://www.amazon.com/Wall-Superthane- ... ial&sr=1-1

- Light switch and 12v power supply. You can also power off the extruder board where the old cooling fan plugged in, but we wanted something we could turn on or off independently of the printer.


I'm happy to answer any questions about installation.

20210413_133434.jpg
Attachments
20210413_133310.jpg
20210413_133248.jpg

FastPrint
Posts: 2
Joined: Sat Apr 24, 2021 10:33 pm

Re: "Stay Cool" - Water Cooled Extruder System

Postby FastPrint » Wed Apr 28, 2021 11:50 pm

I really like your setup there and would like to make something similiar. It looks like you made your heat exchangers out of copper and was wondering if you had a pdf print or photo with print dimensions. I am a machinist by trade and would like to make some myself. Thanks for your help in the matter and thanks in advance.


Return to “User's Gallery”

Who is online

Users browsing this forum: No registered users and 1 guest