N2 Touchscreen not reacting to touch on it's left side

Topics around mechanical design, controller and electronics. Mods & hacks welcome.
EldRick
Posts: 380
Joined: Thu Jun 22, 2017 5:55 am

Re: N2 Touchscreen not reacting to touch on it's left side

Postby EldRick » Tue Nov 26, 2019 10:10 pm

Discontinued. Out of stock.

Daws
Posts: 44
Joined: Wed Dec 13, 2017 6:41 am
Location: Qld, Australia

Re: N2 Touchscreen not reacting to touch on it's left side

Postby Daws » Wed Dec 04, 2019 2:26 am

I've been looking for a replacement since the Jaycar version has been discontinued, any idea if this one will work?

https://www.ebay.com/itm/7-inch-1024-60 ... SwhTBbKMRw

Screen is made by Amelin part number: AML78540B-A1-CTP

Resolution is the same and it's LVDS interface, it has no driver board but the connections look the same as the Jaycar one. I'm just not sure if the pin designations on the ribbon cable are compatible?
CAD-NX Printer-Raise3D N2

Jetguy
Posts: 3085
Joined: Tue Mar 22, 2016 1:40 am
Location: In a van, down by the river

Re: N2 Touchscreen not reacting to touch on it's left side

Postby Jetguy » Wed Dec 04, 2019 1:20 pm

Caution, for an N series, the daughter card that connects to that screen has a 12 pin touch interface where as that ebay screen linked has a 6 pin incompatible interface. So the LCD might work, but the touchscreen portion will not.

Daws
Posts: 44
Joined: Wed Dec 13, 2017 6:41 am
Location: Qld, Australia

Re: N2 Touchscreen not reacting to touch on it's left side

Postby Daws » Thu Dec 05, 2019 12:02 am

Jetguy wrote:Caution, for an N series, the daughter card that connects to that screen has a 12 pin touch interface where as that ebay screen linked has a 6 pin incompatible interface. So the LCD might work, but the touchscreen portion will not.


Thanks for the info, guess I'll keep using the mouse plugged into the side of the printer....
CAD-NX Printer-Raise3D N2

zamble
Posts: 6
Joined: Thu May 23, 2019 9:34 pm

Re: N2 Touchscreen not reacting to touch on it's left side

Postby zamble » Tue Jan 28, 2020 12:53 pm

I have a non working touch screen too. Works fine with mouse. Very frustrating. tried everything, but not into paying $450 for a new screen!

NewbPilot
Posts: 287
Joined: Tue Jul 26, 2016 2:16 am
Location: West Palm Beach, FL
Contact:

Re: N2 Touchscreen not reacting to touch on it's left side

Postby NewbPilot » Mon Mar 16, 2020 3:52 pm

Just curious if there's a fix for this? Or an alternative part we can order?

Armin Kaulbars
Posts: 2
Joined: Tue Mar 17, 2020 8:47 am

Re: N2 Touchscreen not reacting to touch on it's left side

Postby Armin Kaulbars » Tue Mar 17, 2020 2:35 pm

In Germany they told us it`s not longer availible.
For me, something like that makes a bad impression and testifies to not being particularly customer-friendly. You can expect more from printers in this price range. Someone here connected another touchpad, but the question was not posted wheni asked how to do it.

DeX
Posts: 223
Joined: Fri Apr 21, 2017 6:56 am

Re: N2 Touchscreen not reacting to touch on it's left side

Postby DeX » Mon Apr 27, 2020 6:46 pm

zamble wrote:I have a non working touch screen too. Works fine with mouse. Very frustrating. tried everything, but not into paying $450 for a new screen!


Got it today :(
Is there a chance for repair that touchscreen?!

tommymc
Posts: 3
Joined: Sat Mar 07, 2020 12:40 am

Re: N2 Touchscreen not reacting to touch on it's left side

Postby tommymc » Thu Apr 30, 2020 11:49 am

I started getting the same issue on my N2. About 2 months ago it would not respond to anything on the left side within 1cm, and now it won't sense anything more than 2cm from the left, which has blocked access to needed buttons now and I can't operate the printer.

Is there any fix for this? Is there a connector inside that could be loose?


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests