bed temperature

Topics around mechanical design, controller and electronics. Mods & hacks welcome.
sunraise
Posts: 11
Joined: Mon Aug 14, 2017 8:01 am

bed temperature

Postby sunraise » Tue Nov 28, 2017 6:26 pm

Hi guys,

I was wondering why my high temp always try to curl up, and after getting pretty desperate, angry and clueless, i took a thermometer..

...abs, poly pc plus, zotrax z-asa pro, fillamentum abs extrafill... tried the abs juice, hairspray..

After several hours of heating the bed to 110C - no glass, just an empty bed, with the lid on, in a 23C degree constant temperature room, i cannot measure more than 80C anywhere on the platform. With the glass on, i get about 73-75C.

I checked the probe.. it measures around 100C in contact with boiling water. Also, the bed is leveled within 10 microns.

Can you please measure yours and share the numbers ?

thanks !

User avatar
John@Raise3D
Posts: 483
Joined: Fri Feb 26, 2016 8:42 am

Re: bed temperature

Postby John@Raise3D » Tue Nov 28, 2017 8:53 pm

Can you please shoot us an email at support@raise3d.com with your location/printer serial number/purchase from and delivery date? Thanks.

sunraise
Posts: 11
Joined: Mon Aug 14, 2017 8:01 am

Re: bed temperature

Postby sunraise » Tue Dec 05, 2017 9:50 pm

I yanked the cables a little, and the temperatures are within couple of degrees now, almost evenly across the whole plate.


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests