Topics around mechanical design, controller and electronics. Mods & hacks welcome.
7 posts • Page 1 of 1
I'd like to see the 3D printed files somewhere. I just had a print go haywire that somehow ended up around my dual hotend making quite the mess and breaking the left fan air ramp(? - 3D printed piece btwn fan and hotend directing air flow).
There is a post in general topics called "STL Design Shared" that has links to STLs for that part and some others. I think this is the one you need: http://forum.raise3d.com/download/file.php?id=86&sid=2565bd853fcde6b5430101f15197e552
rlballard wrote:It would be nice to have available a spare parts kit that included:
[*] Fire rods
[*] Thermal couples
[*] Bed Clips
What are "Fire rods"? Heaters?
A good lube is SuperLube which is teflon suspended in a gel. Lubing the gantry is a questionable thing to do since the bushings should be impregnated with a lube or if there are linear bearings the bearings are lined internally and external application is usually not possible.
Who is online
Users browsing this forum: No registered users and 2 guests