Backslash or bad movements on Pro2 Plus

Topics around mechanical design, controller and electronics. Mods & hacks welcome.
pacoblasco
Posts: 3
Joined: Wed Oct 13, 2021 4:37 pm

Backslash or bad movements on Pro2 Plus

Postby pacoblasco » Wed Oct 13, 2021 5:10 pm

We are getting problems on Raise3D Pro2 Plus. Holes are not cercle and bottom/top filling is not equidistant. Lines are grouped in two and there is a gap between them
Best are fine (we believe so), and we have put a a belt tensioner, anyway.
Attache you will find a photo. Any clue? Suggestions?
Thanks in advance!
Attachments
IMG_4228.jpeg

User avatar
Steven@Raise3D
Posts: 533
Joined: Thu Dec 17, 2020 11:24 pm

Re: Backslash or bad movements on Pro2 Plus

Postby Steven@Raise3D » Thu Oct 14, 2021 2:37 am

pacoblasco wrote:We are getting problems on Raise3D Pro2 Plus. Holes are not cercle and bottom/top filling is not equidistant. Lines are grouped in two and there is a gap between them
Best are fine (we believe so), and we have put a a belt tensioner, anyway.
Attache you will find a photo. Any clue? Suggestions?
Thanks in advance!


Based on the images and what you have described it looks like one of your X or Y drive motor couplers may be broken or loose. You can locate the couplers by using the guides that I have attached below. What you are looking for is any types of cracks or breaks in the coupler. Also, check each set screw to ensure that they are tightened properly.

https://support.raise3d.com/Pro2-Series ... 4-676.html
https://support.raise3d.com/Pro2-Series ... 4-685.html

pacoblasco
Posts: 3
Joined: Wed Oct 13, 2021 4:37 pm

Re: Backslash or bad movements on Pro2 Plus

Postby pacoblasco » Thu Oct 14, 2021 10:35 am

Thanks! We are going to check it!

pacoblasco
Posts: 3
Joined: Wed Oct 13, 2021 4:37 pm

Re: Backslash or bad movements on Pro2 Plus

Postby pacoblasco » Fri Oct 15, 2021 5:52 pm

Both couplings were broken. Changed and holes are round. Thanks!


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests