Error 11

Topics around mechanical design, controller and electronics. Mods & hacks welcome.
Kashmiria
Posts: 11
Joined: Tue Jul 24, 2018 10:00 pm

Error 11

Postby Kashmiria » Wed Aug 15, 2018 8:27 pm

I have error as I wanted to close rightside.
Please help me to resolve this error
Attachments
20180815_221544.jpg

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Error 11

Postby Vicky@Raise3D » Thu Aug 16, 2018 2:04 am

Would you like to advise whether your printer is a dual-extruder version or single-extruder version?
It looks like the second thermocoupler is not properly functional.
You can test with flashing single-extruder version of firmware or switching the thermocoupler on left and right with each other to see whether the error message goes or changes.

Kashmiria
Posts: 11
Joined: Tue Jul 24, 2018 10:00 pm

Re: Error 11

Postby Kashmiria » Thu Aug 16, 2018 6:41 pm

Thanks for reply.
I have dual but I want to have only one side and uploaded single firmware.
Its working on but extruder temp stop at 205/215 in loading or printing and not able to print any longer after one good print.
What to do?

Kashmiria
Posts: 11
Joined: Tue Jul 24, 2018 10:00 pm

Re: Error 11

Postby Kashmiria » Thu Aug 16, 2018 8:43 pm

Fixed with single-extruder version of firmware and after one print temp in extruder is not getting more then 205/215 and can't load or unload or print.

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Error 11

Postby Vicky@Raise3D » Fri Aug 17, 2018 1:16 am

Then I guess your original issue may due to that you remove the second thermocoupler or have a defective thermocoupler on right side.
If you want to reuse the right side, don't forget get a new thermocoupler and flash the firmware back to dual version.

Kashmiria
Posts: 11
Joined: Tue Jul 24, 2018 10:00 pm

Re: Error 11

Postby Kashmiria » Tue Aug 21, 2018 8:43 am

Now I have done some prints but when I close the printer for night and turned on again temp don't goes more then 205/215 and can't print or unload the filament.
What is wrong?

User avatar
Vicky@Raise3D
Posts: 8066
Joined: Fri Mar 25, 2016 3:54 am

Re: Error 11

Postby Vicky@Raise3D » Wed Aug 22, 2018 12:24 am

If you have tried other target temperature values, higher or lower beside 215? Nozzle's temperature will always be 10 degrees lower than target or always be 205C?

agomez
Posts: 1
Joined: Fri Jun 11, 2021 1:43 am

Re: Error 11

Postby agomez » Fri Jun 11, 2021 1:51 am

How can I clear this Error11?
My printer is a dual extruder, currently using the right side mainly
Just turns on and the error appears.
Restart and doesn't go away.
How to bypass and update the firmware?

User avatar
Steven@Raise3D
Posts: 415
Joined: Thu Dec 17, 2020 11:24 pm

Re: Error 11

Postby Steven@Raise3D » Sat Jun 12, 2021 1:14 am

agomez wrote:How can I clear this Error11?
My printer is a dual extruder, currently using the right side mainly
Just turns on and the error appears.
Restart and doesn't go away.
How to bypass and update the firmware?



Would you be able to attach an image of the error? Also, would you be able to attach the latest serial log from the machine?


Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 1 guest