FEATURE IM 4.1.1 Confirmation for Models Not on the Build Platform Warning

Discussions about ideaMaker and other printing software.
svandru
Posts: 39
Joined: Tue Dec 31, 2019 5:48 pm

FEATURE IM 4.1.1 Confirmation for Models Not on the Build Platform Warning

Postby svandru » Thu Jun 17, 2021 3:42 pm

Title: Confirmation for "Models Not on the Build Platform" Warning
Description: Add a confirmation checkbox for the warning that says “[models] are not on the build platform and have no support, do you want to add support structures for these models?” A corresponding setting should also be added to “Preferences/Confirm and Tip” tab.
Version: 4.1.1
Operation System: MacOS Mohave 10.14.6
Reason: Models can be stacked on top of each other without needing supports. My benchy model is sliced into three sections (hull, cabin, roof) so that I can apply different group and layer settings to each part. These parts do not need supports as they rest completely on one another. However, every time I print a benchy (I am up to #124), I am presented with this warning box. I would like the ability to permanently dismiss that warning like others such as the one about group and layer settings.

Thank you for your consideration

User avatar
Vicky@Raise3D
Posts: 8051
Joined: Fri Mar 25, 2016 3:54 am

Re: FEATURE IM 4.1.1 Confirmation for Models Not on the Build Platform Warning

Postby Vicky@Raise3D » Fri Jun 18, 2021 4:24 am

Thanks for your suggestions!
We will add this request into developing list.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests