Page 1 of 1

z hop across models and supports not working

Posted: Sat May 08, 2021 4:58 pm
by lt72884
Hello:)

I have 3 tension blocks i am printing and i have set it up so that zhop only happens across models or supports. Zhop is not happening on any of it. i even held the coupler to feel for the zhop and nothing.

attached is the data file and a link to the gcode file since it is over 5mb

https://drive.google.com/file/d/1wYTsnC ... sp=sharing

thanks

Re: z hop across models and supports not working

Posted: Tue May 11, 2021 5:44 am
by Vicky@Raise3D
Across models and supports means enable Z hop when travelling from model to support or travelling from support to model. We didn't find support structures in your .gcode file.

Re: z hop across models and supports not working

Posted: Mon May 17, 2021 5:00 am
by lt72884
Vicky@Raise3D wrote:Across models and supports means enable Z hop when travelling from model to support or travelling from support to model. We didn't find support structures in your .gcode file.


Now it makes sense haha. Ok,then it should be worded "from model TO supports" NOT models AND supports. Its very miss-leading how its worded in the software, hence why i have NO supports because using the word AND means across models AND supports, as in from one model to another model, which should be a feature added. almost every other slicer has the option to zhop between models:)

thanks

Re: z hop across models and supports not working

Posted: Tue May 18, 2021 1:58 am
by Vicky@Raise3D
We have across printed parts in developing list. Will be available to meet your request.

Re: z hop across models and supports not working

Posted: Tue May 18, 2021 3:05 am
by lt72884
Vicky@Raise3D wrote:We have across printed parts in developing list. Will be available to meet your request.


Thank you for taking the time to reply back to me:) im glad to hear that a feature such as "across models" will be added.