ideaMaker 4.0.0-Beta Release Notes

[svandru]

The main difference is the lights on both front and back of the model.

This new lighting system is working great. It really improves the previews I've tried it with so far.

[svandru]

Send to Octoprint is a wonderful addition, and the new light theme is great, too. Thanks for moving preferences on the Mac menu, and I can now use pause at height to do filament changes. 4.0 is looking good.

[DeX]

I've got this a lot btw.

This happens with a wide variety of actions in IM.

yeahh yeahh my Windows is 8 years old.

[DeX]

The printer does not wait for the table temperature to DECREASE to the specified one. Can start to print PLA on a 90C table, for example.

[Vicky@Raise3D]

Would you like to share your .gcode and .data files with us?

[DeX]

Would you like to share your .gcode and .data files with us?

Just try to warm up bed to 100 and then start to print some gcode with 65С bed temp..
And print starts without waiting the bed to cool down to 65C..

[DeX]

Would you like to share your .gcode and .data files with us?

Just try to warm up bed to 100 and then start to print some gcode with 65С bed temp..
And print starts without waiting the bed to cool down to 65C..

SO, you got it too?

[Vicky@Raise3D]

Would you like to share your .gcode file with us? We want to check the start gcode.
There's probably something wrong with the codes for heat bed.