Bug under support generation in ideaMaker

Discussions about ideaMaker and other printing software.
Posts: 1
Joined: Mon Jul 13, 2020 8:40 pm

Bug under support generation in ideaMaker

Postby ilya_one_ » Wed Jul 15, 2020 11:16 am

Yesterday I founded very interesting bug, the problem is definitely in ideaMaker (incorrect support generation), not only in the last version (I performed slicing on all versions started with 3.3.0 :lol: )

I had a need to print ps4 stand fat version (here it is - https://www.thingiverse.com/thing:1451878) for my friend, but something had been going wrong :lol:

After model slicing, support layers, which are printed by the second extruder are displayed correctly in ideaMMMaker, but another slicer and 3d printer don't think so) in reality supports were moved in the strange way) I checked the code, generated by ideamaker in another slicer, and it showed me what is going on in fact.

What Do You think about this strange things, guys?)
Снимок экрана 2020-07-15 в 14.04.40.png
"Gcode is displayed in another slicer"
"Raise performs this code in real life"
Снимок экрана 2020-07-15 в 14.03.10.png
"ideamaker displays the model after slicing in this way"
Last edited by ilya_one_ on Thu Jul 16, 2020 11:14 pm, edited 1 time in total.
Raise Pro 2 Plus

User avatar
Posts: 7889
Joined: Fri Mar 25, 2016 3:54 am

Re: Bug under support generation in ideaMaker

Postby Vicky@Raise3D » Thu Jul 16, 2020 12:42 am

Would you like to check the XY offset set in your touchscreen and printer settings in ideaMaker?
You can share us your .gcode file if you need us to have take a look for your settings.

Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests