Page 1 of 1

Printing with two nozzles only one makes a wipe tower

Posted: Tue Jul 14, 2020 3:57 pm
by schuema
Hello!

I print with two nozzles, but only one nozzle creates a wipeTower. However, the second nozzle does not print an entire layer. If you print an entire layer, it will also create a wipe tower layer. Any idea or is it a bug?

See my screenshot!
Bildschirmfoto_2020-07-14_17-56-08.png
Screenshot

Re: Printing with two nozzles only one makes a wipe tower

Posted: Tue Jul 14, 2020 11:59 pm
by Vicky@Raise3D
Would you like to share .idea, .gcode and .data files here?

Re: Printing with two nozzles only one makes a wipe tower

Posted: Wed Jul 15, 2020 8:11 am
by schuema
Sure! Here they are
GummiTest.gcode
Gcode
(358.83 KiB) Downloaded 30 times

GummiTest.idea
Idea
(56.78 KiB) Downloaded 28 times

GummiTest.data
Data
(52.77 KiB) Downloaded 28 times

Re: Printing with two nozzles only one makes a wipe tower

Posted: Thu Jul 16, 2020 8:32 pm
by Vicky@Raise3D
If there are multiple setting groups, you need input the position for the other Wipe Tower.
Image_20200716132715.png

Re: Printing with two nozzles only one makes a wipe tower

Posted: Fri Jul 17, 2020 1:44 pm
by schuema
Perfect. Thank you for the help