Incorect slicing edges

Discussions about ideaMaker and other printing software.
Online
Labirynt
Posts: 2
Joined: Thu Jun 25, 2020 9:08 am

Incorect slicing edges

Postby Labirynt » Thu Jun 25, 2020 9:18 am

Hi,

in some models, IdeaMaker (3.6.0.4300 beta) sometimes incorect slicing models...

Please, find attached files with model and generated gcode

model_after_slicing.PNG


model_before_slicing.PNG


PS in Cura model was sliced correctly
model_cura_slicing.PNG
Attachments
incorect_slicing.idea
(278.77 KiB) Downloaded 7 times
incorect_slicing.gcode
(725.37 KiB) Downloaded 5 times

User avatar
Vicky@Raise3D
Posts: 6696
Joined: Fri Mar 25, 2016 3:54 am

Re: Incorect slicing edges

Postby Vicky@Raise3D » Fri Jun 26, 2020 1:38 am

Please uncheck the Thin Wall option under Other tab and see whether the result gets better or not.

Online
Labirynt
Posts: 2
Joined: Thu Jun 25, 2020 9:08 am

Re: Incorect slicing edges

Postby Labirynt » Fri Jun 26, 2020 7:05 am

No, after turning off thin wall still slicing with issues:
thin_wall_off.PNG

User avatar
Vicky@Raise3D
Posts: 6696
Joined: Fri Mar 25, 2016 3:54 am

Re: Incorect slicing edges

Postby Vicky@Raise3D » Sat Jun 27, 2020 4:16 am

It looks find under 2D Mode. Under 3D Mode, the preview seems be affected by change in direction for that section.
Try check Preferences > Visual gcode by traces without emulating extrusion width in 2d mode and see lines.
And the value of Minimal Segment Langth seems a bit too large causing the outer surfaces are not sliced evenly.
Attachments
Image_20200626202017.png


Return to “Software”

Who is online

Users browsing this forum: Labirynt and 2 guests